SF3 game encryption cracking

June Security

Reposted from youxia: sf3 attack method
Sf3 attacks on the Internet are generally caused by the disconnection of the optical drive cable, so that the game program cannot detect the optical drive, so as to use the virtual optical drive to cheat the anti-copy program!
Therefore, we can prevent the anti-Copy Program from detecting the data line in terms of settings!
Do not start the SF3 encrypted game after it is installed.
1. Perform system settings first:
Right-click my computer-properties-hardware-Device Manager, set the Primary and Secondary IDE channels under the ide ata/ATAPI directory to "NONE", and disable your actual Optical Drive.
Ii. settings in BIOS
Restart to enter the BIOS settings (the following page varies depending on the bios version. Refer to the reference principles only)
1. Select the first Standard CMOS Setup item from the level-1 menu.
(Standard CMOS settings) set the optical drive to "NONE" (the main board is generally "AUTO" by default). If you have unplugged the optical drive, this step can be omitted.
2. Go to chipset features setup (chip set specifications) if your optical drive is connected to IDE1, Set Primary Master/Slave Primary IDE Hard Drive parameter to "Disabled". If your optical drive is connected to IDE2, Set Secondary Master/Slave Secondary IDE Hard Drive parameter "Disabled" (this step is especially important and cannot be set incorrectly, you must set the IDE channel where your optical drive is located to "Disabled", which is related to success or failure. In addition, even if you unplug the optical drive, this step cannot be omitted)
After all is done, save the disk and exit. re-enter the operating system.
Now I see my computer-properties-Device Manager, (hardware under XP-Device Manager), in the DVD/CD-ROM drive, only the Virtual Drive "Generic DVD-rom SCSI Cdrom Device" with the Daemon itself is retained, and the others are no longer there. In this way, only one virtual drive is left in the computer, this will achieve the purpose of pulling the optical drive without the boot box, and then use other optical drives to enter the bios settings back to the original state, "enable" the real cdrom.
3. deamon tools settings
Select all four options, including RMPS in deamon tools 3.43. Load with Daemon tools
Additional points are also reprinted
It seems that we must pay attention to the steps: Here is the miracle
This patch (note; it is a very small image) is consistent with the patch I used to post from a foreign website. In fact, I have always been expecting a perfect cracking attack. It seems that there are too many lazy people, otherwise, the copy protection technology is too high, so there is only such a half-cracking method.
1. in the past, when some people installed the game, they would find that the first disk is required to be placed after the installation of the first 2nd disks, and then an error message will appear, I think this is caused by incomplete installation. It doesn't matter. The installation will be complete once you install it again!
2. Pay attention to this place and pay attention to the steps; otherwise, the full fee will be incurred! After the game is installed, there is a game running icon on the desktop. Do not click the machine at this time, because a copy protection will check your computer and your reverse version will be ineffective!
3. after the game is installed, do not use dual-host servers. I just want to tell you what will happen when there is a double opportunity. The method is too cumbersome as prompted by the experts, this is not conducive to the future use of the optical area, so simply unplug the optical area data line!
4. Use DAEMON Tools or the latest Alcohol 120% version to read the patch !!
5. then run the game icon on the dual-host desktop, prompting the machine to restart (in fact, it is a step to re-check the anti-copy of the optical area), re-enter the desktop, the dual-host game run icon, haha ^ success !! Enter the game !!
In general, it is necessary to follow the steps, as I used to directly run the game without pulling data lines or loading small scenes, and asked the machine to restart before pulling data lines, when you run the game, the following error occurs: Check whether your CD is damaged or put it into a genuine version. I have been wondering what is going on with this problem. Some people mistakenly export the error from the hard drive sada !! It seems totally wrong !! This is a step !! Be sure to pay attention to this! Haha ^ this first game! Happy !!!!!

 

More and more games are now using the SF3 encryption method, such as the legend of the fairy sword and the legend of the legend 3 World War II hero corene mcrelay rally.

When cracking such games, we usually use the method of unplugging the optical drive cable and disabling the optical drive so that the anti-copy program cannot detect the optical drive. This method is too troublesome. In fact, why do you listen to me like this? 'I am using Corin mcre'? rally for testing

1. First, install the downloaded game dial or the corene mcrelay rally in the form of a virtual optical drive. If 3.4 GB is too large, I will use the Virtual Drive''

After installation, insert a non-game installation CD or a virtual CD (Note: This is very important)

2. Run the game and restart it as prompted'

3. Run the game again and enter the displayed serial number.

How can we easily crack the advanced SF3 encryption method '?

In fact, this is also true for other games. You only need to virtualize a non-game installation disk. It's just that simple and quick to try ~~

If you have any questions, welcome to discuss kg01@163.com with me.