Sun2540 storage configuration document (note)

Sun2540 storage configuration document (note) 1. click unlabeled-configuration file 2. create a configuration file scada_profile and select the size of the raid1 segment 512k. the number of the enabled preread disk variable disk type sas3. click the storage pool and select the created one from the default storage configuration file. SC... sun 2540 storage configuration document (notes) 1. click unlabeled-configuration file 2. create the configuration file scada_profile and select the size of the raid1 segment. The size of the 512 k pre-read disk is enabled. the number of the variable disk type sas3. click the storage pool and select the default storage configuration file. scada_profile4 created, select two disks as the hot spare disk for the physical device 5, Click new volume-use the first storage pool for the volume --- select ---- default select the disk not allocated to the retaining wall (create the heart virtual disk) select the disk to be used-select all disks from the specified image pair-configure one or two volumes-enter the volume name scada_l Og: the number of created ports is 1. specify the size of 600 GB. select B as the controller. (here, two LUNs are created on each machine. one is used for log, and the other is used for database log to go to controller B, database A control) 6. select ing to the default storage domain (this is A problem, it is best to create A host group. Select ING to new hosts. 7. select the default storage domain for the host group, number of LUNs: 1 click to finish ------------------------------------------- 2 then follow the above method to create scada_data size for the remaining space configuration volume ---- enter the volume name scada_log, the number of creation is 1, you do not need to know, select the second option in the previous step, that is, use the remaining space, controller select A =================================================== ================== 3. collect logs in the upper right corner ---- service consultant ------ collect supported data ==================== =================================================================4 the multi-path software stmsboot-eformat of devfsadm is assumed to be 2 partitions. if it is 0 p, check the current partition p l save quit newfs/dev/rdsk/***** if the s0 value exceeds 2 t, you can add parameters on your own. run man to mount/dev/dsk/***** s0/mnt (my Directory) vi/etc/vfstab ==================================== ====================== 012 the entire partition, cannot modify 34567 ======================================================== ========================