Telecom fiber optic cat connected to wireless router

Change home network to optical brazing, how to connect the fiber to the wireless router, how to set:

General light-soldering cat and router back information such as IP address and password. Check out: Light brazing Cat: 192.168.1.1; Router: 192.168.1.1. Therefore, the IP address of the router needs to be modified.

1. Connect: Light-brazed cat Network Port with network cable connected to power-on routers of the WLAN port, from the network port of the router connect the network cable to the computer's cable port.

2. settings: Enter the ip,192.168.1.1 behind the router in IE or other browser , Enter the password, and set up the router .

1) Click on the router to the left "Setup Wizard" to select PPPoE

650) this.width=650; "Src=" Http://s4.51cto.com/wyfs02/M01/85/A0/wKioL1eqoqih2EiPAAAjQi3GC9w421.png-wh_500x0-wm_3 -wmp_4-s_930019326.png "style=" Float:none; "title=" Qq20160810113021.png "alt=" Wkiol1eqoqih2eipaaajqi3gc9w421.png-wh_50 "/>

2) Enter the Internet account number and password provided by the telecom

650) this.width=650; "Src=" Http://s4.51cto.com/wyfs02/M02/85/A0/wKiom1eqoqixJhKYAAAVbHpVaxE802.png-wh_500x0-wm_3 -wmp_4-s_2990271216.png "style=" Float:none; "title=" Qq20160810113053.png "alt=" Wkiom1eqoqixjhkyaaavbhpvaxe802.png-wh_50 "/>

3) Wireless Settings

650) this.width=650; "Src=" Http://s4.51cto.com/wyfs02/M02/85/A0/wKioL1eqoqjQPVkVAAAj4iESOEg250.png-wh_500x0-wm_3 -wmp_4-s_4019505532.png "style=" Float:none; "title=" Qq20160810113127.png "alt=" Wkiol1eqoqjqpvkvaaaj4iesoeg250.png-wh_50 "/>

4) Click on the left network parameters, select the WAN port, click the following automatic connection, save.

650) this.width=650; "Src=" Http://s5.51cto.com/wyfs02/M00/85/A0/wKiom1eqoqmwJ6a_AABB0h6lUDo446.png-wh_500x0-wm_3 -wmp_4-s_1447860192.png "style=" Float:none; "title=" Qq20160810113228.png "alt=" Wkiom1eqoqmwj6a_ Aabb0h6ludo446.png-wh_50 "/>

5) Click the LAN port on the left network parameter to set the Modify the IP address to 192.168.2.1, avoid the IP address conflict with the fiber-optic cat.

650) this.width=650; "Src=" Http://s5.51cto.com/wyfs02/M02/85/A0/wKiom1eqoqmgppQjAAARcGnIOLU765.png-wh_500x0-wm_3 -wmp_4-s_2013666787.png "style=" Float:none; "title=" Qq20160810113258.png "alt=" Wkiom1eqoqmgppqjaaarcgniolu765.png-wh_50 "/>

6) Click on the DHCP service on the left to see if the following information has been shown.

650) this.width=650; "Src=" Http://s5.51cto.com/wyfs02/M00/85/A0/wKioL1eqoqnCk0VlAAAnVDCpkIY614.png-wh_500x0-wm_3 -wmp_4-s_1195418040.png "style=" Float:none; "title=" Qq20160810113345.png "alt=" Wkiol1eqoqnck0vlaaanvdcpkiy614.png-wh_50 "/>

3. Restart: Restart the fiber-optic cat, connect the computer, and see if it is successful.

This article is from the Apple blog, so be sure to keep this source http://59465168.blog.51cto.com/5268021/1836468

Telecom fiber optic cat connected to wireless router