The ARM board cannot collect infrared images !!?? -- Linux general technology-Linux technology and application information. For details, refer to the following section. I made an infrared camera image acquisition on the cm-t3530 board, the system uses the 2.6.32 kernel. Because the infrared camera outputs analog signals, it must first be converted to digital signals through the image acquisition card before further processing on the board. Now the infrared camera is connected to the image acquisition card MINE Vcap2860 through the AV terminal, and the USB port of 2860 is connected to the board.
I wrote a program to read the YUYV component of the collected images and found that all the images were 0, that is, the images were basically collected. If you use a USB camera to connect directly to the Board (you do not need to capture the card at this time), the YUYV component has a value, that is, the image is collected. If the infrared camera is connected to my PC through the acquisition card, the YUYV component is worth the same program. I don't know why I can't collect infrared images on the ARM board. Please kindly advise me.
The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion;
products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the
content of the page makes you feel confusing, please write us an email, we will handle the problem
within 5 days after receiving your email.
If you find any instances of plagiarism from the community, please send an email to:
info-contact@alibabacloud.com
and provide relevant evidence. A staff member will contact you within 5 working days.
