The configuration of MPLS traffic engineering and the detailed analysis of the major attribute adjustment

Source: Internet
Author: User

What is the premise of using MPLS traffic engineering for CISCO? or MPLS te configuration logic:

Cisco IOS software version that supports MPLS traffic engineering.

The network needs to start CEF.

The link state protocol used as IGP OSPF or Is-is. Only these two protocols can support TE. (OSPF provides a class tenth LSA to propagate related TE information).

The router is globally enabled for traffic engineering.

A loopback interface used as the router ID for MPLS traffic engineering.

The basic te tunnel configuration.

About Te Tunnel, must be one-way.

So if the PE on both sides must go to te Flow Engineering tunnel, you need to configure at both ends.

The topology map still refers to the previous:

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.