The method of using router to control Internet

First, Internet control description

Many home users are now using similar types of broadband Internet access via telecommunication ADSL or other companies. The cost of broadband is low, and for most home users who do not have a large amount of data to download, a family or a computer exclusive of an ADSL a little waste of resources, so many people are sharing a broadband internet.

This way of sharing the Internet is as follows: Telephone line-Voice separator-ADSL cat-Broadband routers-switches, hubs-computers, in which case the broadband router can be properly set up on the Internet can be controlled.

Two, obtain the IP and MAC address of all users in the local area network

Obtain MAC address method: Win+r, input cmd, use nbtstat-a IP address to view; obtain own computer IP and Mac method: Win+r, input cmd, Use the Ipconfig/all to view, obtains the IP the method to be many, recommends using the Local Area Network View tool.

Third, the landing broadband router

to open IE, input 192.168.1.1 (usually this ...), there will be landing window, account: admin, Password: admin, after landing will appear broadband router Settings page.

(1) Do not allow a computer to access the Internet settings

1, set page-security Settings-Firewall settings-Choose to open the firewall, turn on MAC address filtering two-prohibit the enabled MAC address in the Set MAC address list to access the Internet.

2, setting page-security settings-mac address filtering-Add a new entry-fill in the MAC address of the computer that is not connected to the Internet and choose to make the entry effective.

When Internet control is set up, computers that are banned from the Internet are not allowed to surf the internet, but there is normal access within the LAN.

(2) only allow your own computer to access the settings

1, set page-DHCP server-static address assignment-bind your IP address to the MAC address (enter and save)

2, set page-security Settings-firewall Settings- Select Open Firewall, open IP address filtering, turn on MAC address filter three-select any data that does not conform to the set IP address filtering rulesPackets, prohibit access to the Internet

3 through this router and only enabled MAC addresses in the list of established MAC addresses, setting the interface-security settings-ip address filtering-adding new entries-put your IP address in and select Make all entries effective

4, Set page-Security Settings-mac address Filter-Add new entry-Put your MAC address in and select Make all entries effective