The reason of the wireless mouse not responding and the solution

Fault Analysis

In fact, the battery leak is not the direct cause of this mouse damage, is mainly in the case of not cleaning the electrolyte on the circuit board, hastily installed on the battery, because the electrolyte itself has a certain conductivity, so in the battery, the integrated block on the short-circuit phenomenon, the current rapidly increased, resulting in the integration block burned.

　　Usage considerations

1. First of all, temporarily do not use the mouse, be sure to remove the battery;

2. Second, once the battery leak is found, must not only see the battery socket contact normal on the battery, be sure to take apart the mouse, carefully look inside whether there is electrolyte, if found on the circuit board has electrolyte, you have to use alcohol to clean, to alcohol completely volatile, then put on battery test.

　　Wireless mouse does not respond to the reasons and solutions:

1. Wireless mouse power source is the battery, some 5th battery, some 7th battery. When your wireless mouse is not responding, you have to check the wireless mouse battery is still there.

2 2.4G Wireless Mouse receiver uses a mini USB interface. If the wireless mouse does not respond to the time, you have to put your wireless mouse on other computers to see, so that the exclusion of wireless mouse response is due to poor USB interface.

3. Under normal circumstances, the 2.4G wireless mouse use distance is 10 to 12 meters. First of all, think about the distance you use the wireless mouse is not beyond the