Three-host interconnection method

This article introduces how to connect three computers by using four NICs (one of which is equipped with a dual Nic and the other is a single Nic, it is very creative to connect the computer without using a hub. Is there any other way? I will introduce my methods to you. Compared with the method described above, you can use less than one network card, and the connection is convenient.

Hardware preparation

1. Three NICs with the same axis head;

2. Two coaxial cables, each of which is several meters (depending on the computer's distance, generally the distance between the two computers should not exceed 100 );

3. Three T-headers (some NICs also offer T-headers );

4. Two end resistors (50 Ω.

It is best to make the cables together when purchasing coaxial cables. With the above equipment, you can start.

Specific Practices

1. Install the network adapter on the computer, insert the three T-headers into the network adapters of the three computers, connect the connection cables to the T-headers, and connect the T-headers of the middle computer to the T-headers of the computer, each side is connected to one computer. In this way, three computers are connected together.

2. Insert two end Resistors on the other side of the idle T-Head of the computer on both sides. Hardware installation ends here.

Note: The two end resistors must be installed. Otherwise, the computer network is disconnected. I am still taking a long detour!

3. Install the driver correctlyProgramAnd network protocols. As long as the hardware is correctly installed, the software installation method is the same as the above.

Note: When the "Working Group" of the three computers are the same, the "computer name" must not be the same. Otherwise, an error occurs.

Okay. restart the computer and open "Network Neighbor". Have you found a new "Working Group? Double-click "Working Group", and the three computers are displayed in front of you.