Tip: The NIC fails to load after VMware workstation clones RHEL6.0 and later

Rest, friends call me about their test environment in the multi-person Linux network card can not load the problem, hehe, n long do not do Linux, so specific understanding of the friend environment: in the test machine is too lazy to build the deployment environment, are copied by the good Rhel environment, and then used in their respective environments, Normal boot, but the network card is always not configured, perform service network restart restart NIC is always loaded, because there is no condition, simply say the processing method:
1, view/etc/sysconfig/network-scripts/ifcfg-eth0 configuration information;

2. Modify the field hwaddr the MAC address under "ethernet0.generatedaddress =" labeled "VMX" in the folder under which the virtual machine resides (that is, keep the system Mac consistent with the virtual machine randomly assigned MAC);

3, delete the system has recorded the Mac information, command: rm-rf/etc/udev/rules.d/70-persistent-net.rules;

4, perform shutdown-r now, reboot or init 1 Restart Linux operating system verification, found that the network card load normally, IP can be configured properly;

5, the problem is basically solved.

This article is from the "Heard" blog, please make sure to keep this source http://wenzhongxiang.blog.51cto.com/6370734/1641444

Tip: The NIC fails to load after VMware workstation clones RHEL6.0 and later