This article provides guidance on the virtual server function application and setup of TL-WDR7800.
A small enterprise needs to open its webpage server to the Internet and use the virtual server function to achieve this requirement. The user's network parameters are as follows:
Server type
|
External port
|
Internal Port
|
WEB
Server
|
8080
|
80
|
Open ports: The port used by Internet users to access the server.
Note:: The above parameters are for reference only. Please refer to the actual conditions.
Log on to the vro management page and click
Application ManagementTo enter the application center, as shown in the following figure:
Find the virtual server and click
Enter, As follows:
1
, Click to add
Click Add.
2
Add ing parameters
Enter the parameters of the server to be mapped, as follows:
External port: The external port is the port used by the Internet access server.
The list after adding is as follows:
Now, the virtual server rule settings are complete.
Based on the preceding settings, you can access the web server through a browser in the following format:
Note:: The specific access form is subject to the actual server requirements.
If your bandwidth is not a static IP address, you can
Dynamic
DNSApply for a domain name account and log on to this account in the vro. Then, use your domain name and open port number to access the server.