TP-LINK router setting method in different bandwidth Modes

Understanding some knowledge about TP-LINK router settings, for TP-LINK router users is very important. In China, the mainstream broadband access modes include ADSL, VDSL, FTTB + LAN Dynamic IP + WEB Authentication, FTTB + LAN static IP + WEB authentication, and wired broadband access. Many access solutions are using the router, but compared with different access methods, the TP-LINK router setting method is not the same, today is to use more compatible TP-LINK broadband road as an example, describes how to set up a vro in different bandwidth modes.

TP-LINK ROUTER settings 1, ADSL: ADSL access is divided into adsl modem and adsl router, if it is adsl router, you need to change the Internet mode to RFC 1483 bridge, and then connect to the TP-LINK ROUTER. Then login TP-LINK Router WEB management interface, through the "Setup Wizard" select ADSL virtual courtesy dialing method, the service provider provided by the "Internet account" and "Internet password" fill in the corresponding location, click Next.

TP-LINK router settings 2, VDSL: its access settings and ADSL are the same. But in some places, you will encounter can be on QQ, but can not open the page, then you need to log on to the TP-LINK router, network parameters in the WAN port settings, MTU value to small, the default value is 1492.

TP-LINK router settings 3, FTTB + LAN Dynamic IP + WEB Authentication: Login TP-LINK Router WEB management interface, through the "Setup Wizard" select "Ethernet bandwidth, automatically from the network service provider such as: China Telecom) "Get IP address dynamic IP address)". After the configuration is complete, go to the running status to check whether the WAN port has obtained the IP address. If the IP address is obtained, enter any URL in the IE address bar. The authentication dialog box is displayed, enter the name and password provided by the network service provider.

TP-LINK router settings 4, FTTB + LAN static IP + WEB Authentication: Login TP-LINK Router WEB management interface, through the "Setup Wizard" select "Ethernet broadband, network service providers such as: China Telecom) provide a fixed static IP address) ", after the configuration is complete, and then enter any URL in the IE Address Bar, the authentication dialog box will pop up, fill in the user name and password provided by the network service provider.

TP-LINK router settings 5, wired broadband Internet access: Login TP-LINK Router WEB management interface, through the "Setup Wizard" select "Ethernet broadband, automatically from the network service provider such as China Telecom) Get the IP address dynamic IP) ", restart the cable modem.