Tp-link Router wired way bridging setup graphics and text tutorial

This paper introduces the method of setting up the Wired Bridge of the Tp-link router, and the router cable bridge is strictly called: two (multiple) routers in series Internet. Mainly applicable to such a network environment: There are a, B two Tp-link routers, a connect moden (cat) Internet, and then connect A and B with a network cable, to achieve the B router can also access the Internet, including wireless network B.

　　method One, router B settings Dynamic IP Internet access

1, using a network cable to connect the computer and Tp-link router B LAN (1, 2, 3, 4) any one; A, b between routers, temporarily do not need to use network cable connection.

Connect your computer to the wireless router only

2, into the B router settings interface, click the "Network Parameters"--> "WAN port Settings"--> "WAN Connection Type" selection: Dynamic ip--> click "Save."

Tp-link Router B set up dynamic IP Internet

3, click the "Network Parameters"--> "LAN port Settings"--> the right "IP address" modified to:192.168.2.1 --> Click "Save", will be prompted to restart the router.

Modify Tp-link Router B's LAN port IP to 192.168.2.1

　　Warm tips: After the B router restarts, the user needs to use the 192.168 2.1来 login B router's setup interface, that is, the router LAN interface IP address, is the wireless router's setting URL.

4. To prepare a network cable, a connection to a 1, 2, 3, 4 of any of the interface, the network cable to the other end of the WAN interface connected to B.

Router A's LAN port connection B's WAN port

After the completion of the appeal settings, as long as a router can access the Internet, then the B router is also available to the Internet, the computer connected to the B Router 1, 2, 3, 4 interface can access the Internet, mobile phones, notebooks and other wireless terminals, connected to B wireless network, can also be online.

　　Method B as a wireless switch

1, using a network cable to connect the computer and Tp-link router B LAN (1, 2, 3, 4) any one; A, b between routers, temporarily do not need to use network cable connection.

Connect your computer to the wireless router only

2, modify the B router LAN port IP address: Click the "Network Parameters"--> "LAN Port Settings"--> "IP Address" modified to: 192.168.1.X (2192.168.1.200--> Click "Save", will be prompted to restart.

Modify Tp-link Router B's LAN port IP address as 192.168.1.200

　　Warm tips: After the B router restarts, the user needs to use the 192.168 1.200来 login B router's setup interface, that is, the router LAN interface IP address, is the wireless router's setting URL.

3, the preparation of a network cable, a router to connect a LAN (1/2/3/4) interface, the other end of the LAN (1/2/3/4 ) connection b Router free interface, note that you must not connect to the B router WAN interface.

4. Shut down the DHCP server on the B router: click "DHCP Server"--> "DHCP service"--> "DHCP server" select: Do not enable--> click "Save".

Turn off the DHCP server for Tp-link router b

After 4 steps to complete the appeal, the B router will be able to access the Internet, if you want to use wireless WiFi on the B router, just set the wireless WiFi name and password on the B router, no more settings.

　　method Two summary: 1, modify B router LAN port IP and a router LAN port IP on the same network segment, 2, b router shutdown DHCP server, 3, a router LAN interface connection b router LAN interface.

The above two methods can realize the cable bridge between the Tp-link router to connect the Internet, the user according to own need, choose a method to set up arbitrarily. If you encounter problems during Setup, read the article carefully to make sure that the steps in the tutorial are consistent, and that the order is consistent, and that you can leave a message behind, and the administrator will answer your questions in a timely manner.