Tp-link WDR5600 Router How to automatically get IP internet

the setting method of Tp-link WDR5600 router to automatically obtain IP Internet

Step one, set up the computer IP address

Before setting up the Tp-link tl-wdr5600 wireless router to surf the internet, you need to set the IP address of the computer to automatically obtain (dynamic IP), as shown in the following figure; If not set, please read the article: Computer dynamic IP Address setting method.

Computer Dynamic IP address configuration

Step two, tl-wdr5600 router installation

Please prepare 1 network cables, first plug the broadband operator's household network cable into the WAN interface of the tl-wdr5600 router, and then put the network cable that you have prepared, one connected to the computer and the other end connected to any LAN (1/2/3/4) interface on the tl-wdr5600 router.

Tp-link tl-wdr5600 Router installation topology map when network cable is connected to the Internet

Note the problem:

(1), in accordance with the way of appeal to complete the installation of tl-wdr5600 router, the computer can not be online for the time being, when the tl-wdr5600 router completes the Internet setting, the computer automatically can access the Internet, do not need to use the computer "broadband connection" to dial the Internet.

(2), a lot of novice users, often asked me this connection, the computer has no network, how to set up the router? When setting up a router, you do not need to have a network, as long as the LAN connection between the computer and the router can be set up, please understand the novice users,

(2) After the installation of the TL-WDR5600 wireless router is successful, the SYS indicator light on the device flashes and the WAN interface is often lit or blinking, and the port connected to the computer in 1/2/3/4 is often bright or blinking. If the corresponding LEDs are not lit or blinking, check to see if the power supply is plugged in, the connection is correct, and the network cable is wrong.

Step three, tl-wdr5600 automatically get IP Internet settings

1. Enter in the browser: tplogin.cn and press the ENTER key on the keyboard. (Input tplogin.cn can not open?) please click to read: tplogin.cn not open solution

Enter tplogin.cn in Browser

2, in the pop-up dialog box "set the login password", as shown in the following figure

Set the login password for the tl-wdr5600 router

Warm tip: Please keep in mind that you set the "Login password", the next login to the settings interface, you need to enter just set the "login password" to be able to log in; If you forget to set the login password, the only solution is to put the tl-wdr5600 router back to the factory settings.

3, into the management interface, the router will automatically detect the way the Internet. If the detected way to access the Internet for automatic access to IP address, please continue to the next setting.

tl-wdr5600 router automatically detects the way of internet

4, in the Internet settings to confirm the way to the Internet to "Automatically obtain IP address", and then click the next arrow.

tl-wdr5600 router automatically gets IP address Internet settings

5, Wireless settings: In the wireless name set the wireless network name, in the wireless password set not less than 8-bit wireless password. If you check the same 2.4G wireless password, 2.4G is the same as the 5G wireless password.

Set up a wireless network on the tl-wdr5600 router

Note the problem:

(1), wireless name, please do not use Chinese, because some wireless devices do not support Chinese, there will be no signal to search the situation.

(2), wireless password, please use the combination of uppercase and lowercase letters, numbers and symbols, and the length must not be less than 8 bits.

6, click "Confirm", complete the setup.

tl-wdr5600 Router Broadband dial-up internet Setup Complete

7, the Setup Wizard completes, enters the router management main interface. Observe the status bar, and if "Internet settings" appear as shown in the picture on the right, the network connection is successful. At this point the computer only needs to connect the router LAN port or wireless network, no need to set up the Internet.

Check the tl-wdr5600 router's Internet settings for success