Tp-link wireless router Settings URL can't open what to do

tp-link wireless router settings URL cannot open the solution

Note: If the user enters the IP address of the wireless router in the browser, it appears that the optical cat setting interface of China Telecom/Chinese Unicom.

First, enter the correct settings URL

Tp-link series of wireless routers, different models to set the URL is not the same, 192.168.1.1, 192.168.1.253, tplogin.cn are Tp-link series routers use the settings URL. So, before you make the setup, please check the URL of the Tp-link router you are using, and you can find it on the bottom label (nameplate) of your tp-link router.

Second, the correct installation of Tp-link router

1, telephone line Internet: users need to prepare 2 network cable, a network cable used to connect ADSL modem and Tp-link wireless Router WAN interface; Another network cable is used to connect the LAN interface between the computer and the Tp-link router (either of the 1/2/3/4).

2, Optical brazing: Users need to prepare 2 network cable, one of the network cable used to connect the light cat and the Tp-link router WAN interface, another network cable to connect the computer and the Tp-link router LAN interface (any of the 1/2/3/4 can).

3, network cable home: Users need to prepare 1 network cable, the first broadband operators to provide the user's home of the network cable inserted in the WAN interface of the Tp-link router, and then the preparation of this network cable, a connection to the computer, the other end of the connection Tp-link router LAN interface (1/2/3/ Any one of the 4 is OK).

Note: After the connection is complete, the router's WAN port LEDs illuminated steady or flash; 1, 2, 3, 4 the interface that connects the computer will always be bright or blinking.

Third, the correct setting of computer IP address

1, right click on "Network Neighborhood"--> Click "Properties"

2, right click "Local Connection"--> Click "Properties"

3, select "Internet Protocol (TCP/IP)"-> Click "Properties" or double-click

3, select "Automatically obtain IP address" and "Automatically obtain DNS server address"--> click "OK".

Set up the Tp-link wireless router before the Internet, you need to set the computer's IP address to automatically obtain (dynamic IP).

Four, the replacement network cable

If there is a problem with the network cable between the computer and the Tp-link router, it will not open after you enter the setting URL in the browser, so you can try to change the network cable between the computer and the router.

V. Wireless connection Tp-link Router settings

If a user has a laptop, you can search the wireless network connected to the Tp-link router in a notebook, and then enter the settings URL in the browser to see if it can be opened.

Six, reset Tp-link router

If you try the above several solutions, still can not open the Tp-link router set up the URL, the Tp-link router could be reset (restore factory settings), do not know how to reset? Please click to read the article: Tp-link Router to restore factory settings method.

Vii. Replacement of routers

If you use the previous 7 methods, or you cannot open the Tp-link router's settings URL, it is mostly the tp-link router itself.

Eight, change the browser

Please switch to a browser and enter 192.168.1.1 in the browser's address bar to see if you can turn it on.

Nine, set up the browser

If you open a browser pop-up dial-up connection, click "Settings"-select "Never dial Connection"-"OK" and then log back in. If you do not eject the dial-up connection when you open IE Explorer, you can ignore this step.

Ten, Work offline

If the browser pops out of work offline, open the browser to select File-Cancel work offline before the tick. If you are not working offline when you open IE Explorer, you can ignore this step.

Pay attention to the problem

If you follow several methods of appeal to set up, you can not open the Tp-link wireless router 192.168.1.1 settings URL, most of your Tp-link wireless router has failed, please switch to a wireless router!!!.

Warm tips

Users using broadband connection dial-up Internet access, must disconnect the broadband connection before setting up the router, make sure that the computer is connected with a short cable to the router's 1/2/3/4 any interface, and then open IE browser in the case of no networking to enter 192.168.1.1.

That is, when the router is set up, do not need to network, is disconnected from the network settings; many people have always thought that setting up a wireless router when you need to be able to set up the Internet, this is completely wrong.