Mobile terminals such as smartphones and tablets have been fully popularized, and more and more service sites such as hotels, shopping malls and restaurants need to provide free Wi-Fi to customers. But need to authenticate the access authority, at the same time push the store, merchandise advertising information. The Web authentication function is flexible and can meet the demand well.
This article guides the Wvr/war Series enterprise-Class wireless Router Web authentication Setup method.
1
,Web authentication configuration
Login Router Management interface, click the
Authentication Management
>
authentication settings
> Web
authentication , the specific settings are as follows:
The "Wired port is exempt from authentication" can be turned on as needed.
Note: If the authentication mode is selected as "one-click", there is no need to "add user" in the second step.
Click the
Certification Management
>
User Management
> User
Management , click, set as follows:
After you add the completed user, you can begin verifying the authentication effect.
3
, wireless internet connection
[1]
connect the wireless signal
Wireless terminals (mobile) connected to the wireless network, jump to the certification login page (some Android phones need to open the browser), as follows:
[2]
login to the Internet
Enter user name, password, click
Login , wireless terminal can be free internet.
At this point, the Web authentication setting is complete, the wireless terminal only needs to connect Wi-Fi signal, enter the corresponding authentication username password to be able to surf the Internet.
If you would like to see a list of certified terminals, you can click on the
certification management
>
Certification status as follows:
