Turn off IDE channel to improve windows2008 running efficiency

turn off IDE channels to improve windows2008 efficiency:

In general, WindowsServer2008 system in the process of start-up, will automatically load all hardware devices successfully, this process will consume a lot of resources and waste a lot of time; in fact, many of the system's hardware devices we usually rarely use, Turning off these idle hardware devices can effectively improve the efficiency of the server system. For example, when we open the system's Device Manager window under the WindowsServer2008 system and expand the IDEATA/ATAPI controller project, we can see that the system contains two IDE channels, which are referred to as the Primary IDE channel under the old version system, Secondary IDE channel; however, the IDE channel has no primary and secondary points in the WindowsServer2008 system environment. Given that many ordinary friends ' computers usually use only one hard disk device, we can completely turn off another IDE channel that is idle to improve the system's boot speed.

When the use state of the Idle IDE channel is turned off, we can first right-click one of the IDE channel options in the Device Manager List window, perform the Properties command from the shortcut menu that pops up, open the properties settings interface for the IDE channel, and click the Advanced Settings tab in the Settings interface. Enter the tab Settings page, where we can see the specific transfer mode of the current device, indicating that the IDE channel is currently in use and that the other IDE channel is idle. At this point, right-click another IDE channel that is idle and perform the uninstall command from the shortcut menu so that the Free IDE channel can be turned off.

The system is running at a slow rate for a long time. There are many reasons for this situation, users need to organize in a timely manner, and the closure of the free IDE channel described above is only a small aspect of optimizing the efficiency of the operation, to ensure that the system is more efficient operation, it is necessary to combine the other aspects of the system settings to be feasible.