The principle of this method is::Use a local database as the host,Connect with a network cableInternet,The other is connected to the host through a wireless network adapter on two machines.,Through the hostInternetConnect to the Internet.
The procedure is as follows::
1. Set host ( Ben X) Wireless Network Properties : IP Arbitrary Address Settings ( However, the number of each segment cannot be greater 255, Everyone knows ...), Set the subnet mask 255.255.255.0, Point " OK " Return" Wireless Network Connection Properties " Window , Select " Wireless Network Configuration " Tab , Point " Advanced " Button , In " Network to be accessed " Select " Only computers to computers ( Specific )", Point " OK " Return " Wireless Network Connection Properties " Window , Point " Add " Button to create a wireless network , Any Input " Network Name (SSID )"," Data Encryption " Select " Disabled ", Always point " OK " Continue , This configuration is enough. .
2. follow the steps 1 to set the ( Local Y) , note that : the first three sections of the IP address must be the same as the ip address , the fourth segment must be different. . for example, in step 1 , set the host's wireless network adapter ip address address: : 172. 16.148.56, the ip address of the client's wireless network adapter must be set to : 172.16.148.xxx, where XXX can be 0 ~ 56 . This setting ensures that the addresses of wireless network adapters of the two machines are in the same network segment. , the two machines can be connected to the LAN. .
3.In the Start menu of the host,Run"Run",InputCMD,Enter,In the pop-up command line window,InputIpconfig/All,Enter,Find the following section:
Ethernet AdapterLocal Connection:
connection-specific DNS suffix.:
description ...........: Broadcom Netlink (TM) Gigabit Ethernet
physical address .........: 00-17-a4-dd-e2-b2
DHCP enabled ...........: Yes
autoconfiguration enabled ....: Yes
ip address ............: 192.168.1.100
subnet mask ...........: 255.255.255.0
Default Gateway .........: 192.168.1.1
DHCP server ...........: 192.168.1.1
DNS servers ......: 221.228.255.1
192.168.1.1
Lease obtained ..........: 2008 Year4Month28Day22:23:56
Lease expires ......: 2008Year4Month29Day0:23:56
find the red line , , go to ip , set " the default gateway " to ip address of the wireless network adapter , in this example, set , to 172.16.148.56, set " DNS server " the address is the ip address marked in red. , 221.228.255.1 .
4.Open the host"Network Connection",In"Local Connection"Right-click,Select"Attribute",Then select"Advanced"Tab,Then"InternetConnection Sharing"Select"Allow other network users to accessInternetConnect",Then keep running"OK".
5.Under normal circumstances,This setting is okay..If not,Try shutting down the firewalls of both machines..