Unreasonable operating instructions that cause the hard drive to break down

Will cause the hard disk catastrophic failure and operation, not the general disk and system errors, these faults usually have no aura, once appear, in the BIOS can not recognize the hard disk, hard disk data to restore the possibility of very little, this so-called hard drive of the enemy. In general, today's hard drives are joined by the S.M.A.R.T automatic detection technology, so that users can see the warning before the fatal failure, backup good data-but this is designed for normal operation, if the user's use of the following methods listed below, the occurrence of the failure may be without warning, that is, sudden death.

The following lists a series of fault reasons, mainly for the traditional mechanical hard disk. For solid-state drives, the current application is not widespread and the problem is not universal. Minimizing misoperation and a stable power environment is a fundamental measure to protect your hard disk.

First, in the boot and shutdown when suddenly forcibly cut off the power

Now the power supply and the ATX design of the motherboard, the general realization of the soft shutdown function. This design makes people feel more convenient. But the soft off the first complete a series of closed the operation of the program, coupled with a variety of operating systems and motherboard manufacturers design compatibility, bug,windows in the shutdown application and then cut off the power of the time will often occur, we may be in many forums and newspaper questions and answers column, all see the question " Why the soft shutdown when the "problem"-at this time the hard drive reset action is probably not completed, if the user uses forcibly cut off the power of the practice, hard disk physical damage is a great possibility.

The correct approach: if the soft shutdown occurs when the panic, should be pressed reset key, so that the system back into Windows, and then officially complete shutdown operation-This may be cumbersome, but to ensure that the hard drive safely reset, thousands of dollars for your hard disk, safety first AH. There is the power-on when the cut-off power: in the normal state of course, no one will do such a boring operation, but when there are some such as display cards or memory is not plugged in, the video line loose, resulting in computer boot without display, many people are only engaged in

Fixed to see the problem, frequent boot, shutdown, plug the Board card, and then boot ... And did not pay attention to the hard drive in the power of the switch under the creak groan-especially when the boot did not show, only a few seconds, the initialization of the hard drive has not been completed, the head is in a sensitive position, all of a sudden cut off power, and then in less than 10 seconds under the current impact, the probability of failure will be greatly increased. Suggest the correct approach: first the hard drive power cord unplugged, you can play. After troubleshooting, it is not too late to connect.

Ii. incorrect operation of the partition

It's a rookie mistake. Most of the--windows version of the various versions of the FAT16, FAT32, NTFS, various forms of the existence of different tasks led to the new rookie often want to transform the partition format, now Ghost and PQ Division Master can do the arbitrary operation of the partition, To adjust the size and format of partitions, especially the latter with the ability to format partitions and hide partitions, these tools are handy for people who are familiar with the operation, but for beginners, the partitioning should be done with special care. Because the partition error is a soft fault, not a physical failure, but if the random operation error, without understanding the basic concept of the case, the unthinking "recovery" operation, may cause the partition's boot area and partition table is too confusing can no longer be identified by any tool software- If you do not have the partition table and hard drive boot area data backup, you have to low-level format-the use of low-level formatting tools have a skilled and knowledgeable or not, due to the partition of the wrong operation of the new hard disk can not use the case, I have seen a lot.

Recommended measures: Whether you are veteran or novice, in the hard drive sensitive operation, backup good partition table and boot area data, error can be recovered at any time correctly. Novice best Please a master, first with the area, familiar with the software interface and instructions after their own operation, after all, the hard disk is different from other accessories, which have your valuable data oh.

Third, the initialization of windows and the use of dangerous practices in the process of operation

Windows is a more sensitive and dangerous time to initialize, and if the user loads too much in the Startup group, Windows initialization can take a lot of time and can cause death

Iv. Other types of unconventional errors

For example, data line plug, bad power caused by the damage, the short circuit and so on, in various newspapers and periodicals sites have many cases, here not one list, their own attention is.

Summary: The above mentioned hard disk is not necessarily the case immediately after the failure, but there is a very high probability of damage-today also play games online well, after shutting down the machine, tomorrow without any hint, the system can not find the hard drive.

Hope that the information summarized above the hard drive is broken what is the reason for your later computer maintenance help!