Virtual MachinesRedhatno access to
bridgeIpAddress
first confirm whether the installation is simultaneous VirtualBox and VMware, this scenario only applies to this type of failure with two virtual machines
Error code:
[Email protected] ~]# ifconfig
Eth0 Link encap:ethernet Hwaddr00:0c:29:bd:65:c8
Inet6 ADDR:FE80::20C:29FF:FEBD:65C8/64 Scope:link
Up broadcast RUNNING multicast mtu:1500 metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:11502 (11.2 KiB)
Lo Link encap:local Loopback
inet addr:127.0.0.1 mask:255.0.0.0
Inet6 addr::: 1/128 scope:host
Up LOOPBACK RUNNING mtu:16436 metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1392 (1.3 KiB) txbytes:1392 (1.3 KiB)
[Email protected] ~]# ifup eth0
Active Connection Status: active
Active connection path:/ORG/FREEDESKTOP/NETWORKMANAGER/ACTIVECONNECTION/4
* * (process:2677): WARNING **:_nm_object_get_property:error getting ' state ' for/org/freedesktop/networkmanager/ ACTIVECONNECTION/4: (+) Method "Get" with signature "ss" on Interface "org.freedesktop.DBus.Properties" doesn ' t exist
Status: Unknown
Error: Activation connection failed.
[Email protected] ~]#
Workaround: Open Edit in VMware-- Virtual network editor -vmnet automatic settings after information - remove Virtualbox host-only Ethernet Adapter Pre-check OK to save
and then landed Redhat # ifup Eth0
To restart the network card :
[Email protected] ~]# ifup eth0
Active Connection Status: active
Active connection path:/ORG/FREEDESKTOP/NETWORKMANAGER/ACTIVECONNECTION/9
Status: Active
Connection is activated
[Email protected] ~]#
This article is from the "Summer Fun Blog" blog, be sure to keep this source http://firstxiatian.blog.51cto.com/7601637/1886943
Virtual machine Redhat Bridge cannot obtain an IP address