What about computer memory shortage?

In today's computer use tutorial, we will share is: computer memory shortage of solutions, then, computer memory is not enough how to do? We need to know what is the computer is not enough memory, such as: Dos under the memory, Windows memory shortage, to the right remedy. Let's take a look at the lack of memory in the computer DOS and the lack of memory in Windows solution!

Not enough memory

One, DOS under the memory shortage

If you are running a DOS application with an "out of memory" failure, you can check and process it as follows:

1, check whether the system provides support for extended memory, you must ensure that the EMM386.EXE command in the Config.sys file contains the RAM parameters, about the RAM parameter settings please refer to the relevant articles, here is not described;

2, if the fault persists, check whether the DOS kernel program and other running applications are compatible, some programs occupy a large amount of conventional memory, and make appropriate processing. For example: Once I was running WPS, the screen showed "insufficient memory" and the system could not run. Considering that before running WPS has performed some other programs, it may be that these programs do not completely out of memory, so restart, run Kingsoft Chinese character system, WPS editing software is still inaccessible, with DOS 6.22 MEM command to view memory, only about 200KB of space left, and Chlib files occupy the main memory up to 255KB, that is, the font placed in the conventional memory, and Jinshan system should be able to automatically use the extended Memory storage library, view the system configuration, in Config.sys with: device=c:doshimem.sysdos= High This means that the DOS kernel program expands the available main memory space after calling into the extended memory, but because the extended memory conflicts with the Kingsoft system, the Chinese character library cannot load the extended memory. There are two ways to solve this problem:

1, remove the Dos=high settings, the DOS kernel program from the extended memory to withdraw from the normal operation.

2, the "/device=c:doshimem.sys" changed to "/device=c:doshimem.sys/int15=320", because the Jinshan system is using the low-end of the expansion of memory, this area if there are other programs reside, the font can not be loaded normally, Using the INT15 parameter to set aside a portion of the traditional expansion memory (that is, not by the XMS specification managed by the INT15 directly used by the expansion of memory), the font and the DOS kernel can use the expanded RAM, so that after the setting, in the Jinshan Chinese character System state can be used in the main memory space up to 512KB, It is about 250KB more than when it is not set.

Second, there is not enough memory in Windows

If an "out of memory" failure occurs when you run a Windows application, you can check and process it in the following ways:

1, you should first check Windows Resource usage, if the resources are more expensive, less available resources, open a new file will appear "out of memory" issue. You can then clean the screen, reduce the number of windows, close unused applications, including the TSR memory resident program, minimize the Windows application to the icon, if the problem only occurs when running a special application, then contact with the application software vendors, may be the data object management is not the result;

2. If the problem is not resolved, clear or save the contents of the Clipboard (clipboard), use the ControlPanel desktop option to set the wallpaper (wallpaper) to none;

3, if the problem persists, the PIF Editor can be used to edit the PIF file to increase the value of the MEMORYREQUIREMENTS:KB required defined in the PIF file; In standard mode, select Prevent Programswitch, when the switch option is open, Exit the application to return to Windows, or in 386 enhanced mode, set display usage to fullscreen (full screen mode), set execution to exclusive, and set the video memory to the lowest possible mode;

4, if the problem persists, reboot into the Windows system, and make sure that no other unrelated applications are running at the start icon, and that there are no unrelated applications loaded by the run or load command in the Win.ini file. In peacetime, "out of memory" problems can generally be handled as follows. First, quit the applications that you don't need to run, and then check how much of the system's resources are available. If the available resources are greater than 30%, you can typically run new programs. When multiple applications are running in the system, you can exit one, check for available resources, and the percentage of available resources does not change before or after an application exits. Indicates that the application does not release the resources it occupies. If you want to reclaim these resources that are not released, you can only exit Windows and then re-enter Windows. In order to ensure that the available resources of the system when booting into windows are sufficient, there should be no unrelated applications in the startup icon to start running at the same time. There are no unrelated applications loaded by the run or load command in the Win.ini file, because unrelated applications that start at the same time may already be consuming a lot of resources so that the application that is being used cannot run. In general, after this processing, there will be no "out of memory" problem.