What if the computer can't save time?

Computer host can not save time how to do content introduction: Some computers use a year or two after the time will appear after the system newspaper press F1 resume error, must click F1 to continue to start the computer, each boot, and then in the desktop will find that the system time needs to be adjusted. Probably after this kind of problem, general will suspect that the motherboard battery is not electricity some computers use a year or two after the time will appear after the system newspaper "Press F1 Resume" error, must click F1 to continue to start the computer, each boot, and then the desktop will find that the system time needs to be adjusted.

Probably after such a problem, the general will suspect that the motherboard battery is dead, but we have to switch on the computer for a few days or weeks, it appears above the problem. What the hell is going on here?

If this problem occurs, the main board of the clock circuit appears leakage, the cause of the fault is more than the battery and clock crystal around the chip capacitor leakage caused, only very individual motherboard is a bridge chip clock circuit leakage fault, resulting in CMOS settings can not be saved.

If this problem occurs, because we have to adjust the time, if not tuned will cause some anti-virus software or registration and time-related applications can not be used, or even register failure. Is that the motherboard that must be repaired or replaced?

The answer is that you don't have to change the motherboard!

Because now the motherboard for the IDE and SATA hard disk detection defaults to Auto mode, as long as the IDE interface with the relevant settings, the system in the boot process will be found that the CMOS setting value has not been lost, the hard drive is not available.

As long as the computer can start normally, the work of the future will be better.

First step: Install the automatic dialing software

Because the computer is basically connected to the network, so we just install an automatic dialing software, and the broadband account to add, set up to start the software, and use the default account number dial the Internet. After that, as long as the computer boot, a desktop will automatically dial the Internet, no longer need to click on the "Broadband connection." Automatic dialing software We can choose the "star Speed" of China Telecom, whether it is Unicom, Netcom, railcom, as long as the use of virtual Dial connection broadband, you can use this software, installation and settings are Chinese interface, the use of very convenient, and can be timed to dial the Internet.

The second step is to install the network time synchronization software

Now there are many Internet network time synchronization software, we can download according to their hobbies and habits, and then installed in the computer, and the software set to start automatically, while the synchronization cycle to set.

As long as the two software installed, our computer regardless of the CMOS battery has no electricity, as long as the boot computer, you can realize the clock automatically synchronized, those application software will not be due to time problems can not be used, especially Kaspersky anti-virus software can be used normally.