What if you can't start the hard drive on the cuff?

If you ensure that there is no misoperation in the copy process, the copy is successful, then the hard drive on the cuff can not be launched after the following reasons: Check whether the jumper set up the error caused, and finally the data line plugged in, restart can be. Check to see if the BIOS is set up correctly, (restore the default value, and then discharge the BIOS). If the model configuration of the copy is different, it is possible that the hard drive will not be able to boot after the cuff. In order to reduce the hard drive against the cuff after the situation, we still have to make sure that we are really hard to copy success. So here's an illustration of the correct hard drive to copy operation steps: (Here to clone "Disk 0" to "Disk 1" for example.) )

The first step: first select Disk clone under the Clone bar.

Step Two: Select the source Disk 0 and click Next.

Step three: Select Target Disk 1 and click Next.

Fourth step: After selecting the source disk and the label disk, click the "Start Cloning" button. (The red boxes below have selected items, such as 4K alignment, and so on, you can set the relevant options according to your needs.) )

Fifth step: When the operation is complete, click "Finish".