What to do when WLAN AutoConfig service fails to start

Wireless network icon display red Fork or wireless icon Normal but not online, found in the service to find WLAN AutoConfig, the startup type is already automatic, but the service is stopped, click Start, pop-up Windows can not start WLAN AutoConfig Service, error code has a variety of.

Reason analysis: Most of this problem is caused by System optimization software optimization system.

　Workaround:

Tip: There is a risk of modifying the registry, please be careful to operate under the guidance of a professional person.

1. Start---Run---input: regedit Click OK, or press ENTER key (enter) Open the registry, navigate to: Hkey_local_machinesystemcurrentcontrolsetservicesndisuio

2. View its DisplayName key value is NDIS usermode I/O Protocol such as defect, can be new.

3. Double-click the Start Edit DWORD value of the right window (if no new), double-click to open, modify the value data for 2, click OK, press F5 key refresh.

4. Start---Run---input: CMD Click OK, or press ENTER key (enter) to open the command prompt. Input: netsh winsock reset return performs the wireless service command. Restart after the operation completes.

　　Note:

Netsh is an interface that can operate almost all network-related settings through the command line, such as setting up IP, DNS, network cards, wireless networks, and so on.

Winsock is the system internal directory, Winsock is the Windows Network programming interface, Winsock work in the application layer, it provides the low-level transport protocol independent of the high-level data transfer programming interface.

Reset is the reset operation on the Winsock.

netsh winsock reset command, which is to reset the Winsock directory. If there is a problem with the Winsock protocol configuration on one machine, it will cause the network connection and so on, you need to reset the Winsock directory with the Netsh winsock reset command to restore the network. This command can reinitialize the network environment to resolve the problem of parameter errors due to software conflicts and virus causes. After the execution of the Winsock command restart the computer, you need to reconfigure the IP, of course, automatically assign IP restart direct use can be.