Win10 IP Address Configuration tutorial, win10ip tutorial

Win10 IP Address Configuration tutorial, win10ip tutorial

How to configure IP addresses in win10 is usually used in Lan. IP addresses are classified into dynamic IP addresses and static IP addresses. For example, how to configure a static IP address.

1. First, right-click the Network icon and click Open Network and sharing center.

2. Select "Ethernet ".

3. When the Ethernet status is displayed, click "properties ".

4. Select "internet Protocol Version 4 (TCP/IPV4) and click" properties ".

5. Enter the IP address. Here the IP address is 0 gateway. Check the number of your vro network. If the IP address is 1, enter the 1 network segment. For example, 192.168.1.22.

6. Click Close.

7. Check whether the IP address is configured successfully. Click "Ethernet ".

8. Click details ".

9. You can see the configured IP address.