Win7 boot need to press F2 how to do?

When computers are used for a long time, there are always all kinds of problems. The most common is the boot problem, many users reflect that the Win7 system boot also need to press F2 in order to start, then encountered this problem how to do it, do not understand the friend to see the small collation of the Win7 system boot by F2 solution!

　　When the computer is powered on, it stays in the boot screen and displays the following English prompts:

Press F2 to Continue,del to enter SETUP

Press F2 Key to continue, press del key to enter the Setup interface. (some motherboards may be prompted to continue by pressing F1 key)

　　Case one: The computer does not have a floppy drive or floppy drive failure

1, the computer does not have a floppy drive or floppy drive failure, while in the BIOS is set up with a floppy drive, this situation will lead to F2 prompts.

2, in most cases, only need to restore the BIOS default settings to return to normal.

3, some of the older motherboard defaults will also open the floppy drive, when entering the BIOS, please select the first "Standard CMOS Features".

4, after entering the "Drive A" set to "None", "Floppy 3 Mode Support" set to "Disable."

5, return to the BIOS settings main interface, select the "Advanced BIOS Features" settings, press ENTER ENTER.

6, the "Boot up floppy Seek" set to "Disabled."

7, press F10 Save, ESC key to exit the BIOS settings, restart the computer can be.

　　Situation two: The motherboard battery is out of power

1, the motherboard has a button battery to maintain the computer without power connected to save the BIOS settings and continue the motherboard clock operation, if the button battery is not electricity will cause this situation. At this point, the first need to disconnect the computer host power cord, open the computer chassis.