Virtual machine Environment: VirtualBox Virtual Environment Redhat 32-bit
Host environment: Win7 Wireless routing
Mode: host-only
Win7 Nat mode The original setting is based on the case of a network cable connection, after the use of the non-line, I can not communicate between the virtual machine and the host, so the host-only mode is reconfigured.
For VirtualBox mode Introduction, refer to http://blog.sina.com.cn/s/blog_7de9d5d80100t2uw.html, below is my configuration.
1 First will be no line from the network card to enable Internet Connection Sharing, the "Home network Connection" is selected as the virtual machine's HOST-ONLY network card, the host-only network card IP address will be automatically set to 192.168.56.1
2. Open VirtualBox, select Manage--Global settings--Network, point to the right of the screwdriver button, in the Pop-up window select the DHCP Server tab, the ' Enable server ' option to cancel, save exit.
3. Configure the network options for the virtual machines that need to be connected to the Internet, choose the connection mode as "Host-only Adapter", the name is generally only one "VirtualBox host-only Ethernet Adapter", the choice is.
4. Start the virtual machine and set up the virtual machine network. The IP address is set to a different address (192.168.56.*) in the same network segment, and the gateway is set to an IP address in the HOST-ONLY network card that is typically 192.168.56.1.
5, close the Win7 firewall and Linux firewall, test each other ping.
Reference:
Http://blog.sina.com.cn/s/blog_7de9d5d80100t2uw.html
Http://blog.sina.com.cn/s/blog_69a9b4140100u3vg.html
Win7 System wireless VirtualBox rehat 32-bit Linux under Host-only mode mutual communication and Internet configuration