First, create a virtual wireless network
We use a WIN8 system notebook for the host, through the shortcut key win+x+a Run the command prompt tool through the administrator's privileges, enter the following command in the window:
Netsh wlan set hostednetwork mode=allow ssid= key=//Create WiFi, create a hosting network *ssid = Custom Network Name *key = Custom network password netsh wlan start hostednet Work//Start the WiFi and start the hosting network (if it fails see Appendix 1)
In "Network and Sharing Center"-"Adapter Settings" Find our new network, the general name is the wireless network link num (Microsoft Virtual Network), and then right-click-"Properties"; Configure IPV4 Parameters:
ip:192.168.1.1
DNS: Sets the DNS address of the network link that the cost desk uses to link the Internet.
-------------------------------------------
Note: If you want to allow other devices to link to this virtual network link, to implement other links through the host computer to access the Internet can be set up.
Right-click on the link to the external network (for example, local link) and then find "share"
By selecting the virtual link you created here, you can make all the devices linked to this virtual network link to the Internet via the host's local link.
Second, configure the client (linked to the wireless network)
In the PC-side of the Intelnet protocol TCP/IP and phone-side settings-wlan configured with the host IP address of the first three-bit consistent address, and host DNS-consistent DNS address.
At the end of the PC and mobile host files are added to the corresponding information.
attached:
If the Netsh wlan start hostednetwork command prompt has an error, then go to check the Device Manager, this virtual link (network card) has not started, if not started, start it manually.
WIN8 system establishes LAN and links Internet via wireless network card