Windows 20,031 network adapters bind multiple IP addresses

1. Open "Network Connection" and select "Local Connection"--right----"attribute" to add multiple IPs;

2. Find "Internet protocol (TCP/IP) Properties" from "General";

3, choose to manually set the IP address, gateway, mask and other information, such as IP address 192.168.1.10, subnet mask 255.255.255.0, Gateway 192.168.1.1;

4, point below the "Advanced" button, in the Advanced "IP Settings" → "IP Address" column under the "Add" button, enter the IP address you want to bind;

It must be stated here that the number of IP addresses added, if selected under "Automatic Metric" (such as), must be on the basis of the current local connection IP address and subnet, the IP address in turn add 1 (the order must be ordered, otherwise need to be deleted and re-ordered to add), otherwise, The added IP address does not connect to the network.

For example

Before manually setting the local Area Connection IP address is 192.168.1.10, then the need to bind the IP address must be 192.168.1.11, 192.168.1.12, 192.168.1.13 down, not allowed to be added in the following order or IP address

such as 192.168.1.9, 192.168.1.11, 192.168.1.12

such as 192.168.1.11, 192.168.1.13, 192.168.1.12

5, Ping the machine through another machine, test the IP address set is correct

http://blog.csdn.net/jackygits/article/details/7028111

Windows 20,031 network adapters bind multiple IP addresses