Windows Server 2003 upgrade win Ser 2008R2 Combat Walkthrough

The above Windows Server 2003 upgrade environment is ready for you to introduce our condition preparation at the beginning of upgrade 2003, including the backup system C disk information, system status information and 03 extended operation on the domain architecture, to facilitate the subsequent upgrade operation to proceed normally, Today for everyone to add is related to the upgrade operation in server R2 on the preparation and server role migration, etc., convenient for everyone to upgrade the operation of the reference and reference (this article immediately described above, if there is doubt welcome message consultation, thank you):

Four, domain control upgrade:

4.1 server plus domain:

1. Modify the IP address of the BJDCN to 10.0.0.254 and specify the BJDC domain DNS address:

650) this.width=650; "height=" 414 "alt=" wkiom1w61c2dq947aafj-4njhpa668.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61c2dq947aafj-4njhpa668.jpg "/>

2. In the System Properties dialog box, click "Change"-Open the calculation properties, click "Change Settings-Enter the domain name" bjdcxr.com ", click OK:

3. Enter the domain administrator account and password and click "OK" to restart the computer.

650) this.width=650; "height=" 382 "alt=" wkiol1w6177ddiyxaafr4nueryi981.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w6177ddiyxaafr4nueryi981.jpg "/>

4. Restart the server to confirm the domain success:

650) this.width=650; "height=" "alt=" Wkiom1w61c3b5bcoaabskv08ayo661.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a3/wkiom1w61c3b5bcoaabskv08ayo661.jpg "/>

4.2 , install ad Server Role :

1. Open the "Run" input "dcpromo":

650) this.width=650; "height=" 247 "alt=" wkiol1w6176tjeieaaciem5uxew812.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a0/wkiol1w6176tjeieaaciem5uxew812.jpg "/>

2. In the AD Domain Services Installation Wizard interface, click "Next"

650) this.width=650; "height=" 437 "alt=" wkiol1w6176gx585aae2rlxewsu177.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a0/wkiol1w6176gx585aae2rlxewsu177.jpg "/>

3. Operating system compatibility prompt, click "Next" to continue:

650) this.width=650; "height=" 439 "alt=" wkiom1w61c6qu9ubaaibpmnqg0k411.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61c6qu9ubaaibpmnqg0k411.jpg "/>

4. Select an existing forest-"Add a domain controller to an existing domain" and click "Next" to continue:

650) this.width=650; "height=" 439 "alt=" wkiom1w61c6cbvqhaadxzrgs0dm024.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61c6cbvqhaadxzrgs0dm024.jpg "/>

5. Enter the domain name BJDCXR, using the current account credentials, click "Next":

650) this.width=650; "height=" 439 "alt=" wkiol1w617-blzyzaafozyj3ync313.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w617-blzyzaafozyj3ync313.jpg "/>

6. Select the domain and click "Next":

650) this.width=650; "height=" 439 "alt=" wkiol1w617_dubgmaaczau8r3cc161.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w617_dubgmaaczau8r3cc161.jpg "/>

7. Select the site and click "Next":

650) this.width=650; "height=" 437 "alt=" wkiom1w61c6a96qaaadynimvqd8166.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a3/wkiom1w61c6a96qaaadynimvqd8166.jpg "/>

8. Tick "DNS Server" and "Global Catalog" and click "Next":

650) this.width=650; "height=" 438 "alt=" wkiol1w617_blso-aaf1jfi9jns464.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a0/wkiol1w617_blso-aaf1jfi9jns464.jpg "/>

9. Whether to create a DNS delegation, select Yes, and click Next to continue:

650) this.width=650; "height=" 438 "alt=" wkiom1w61c-c-cmwaaflitypetk017.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a3/wkiom1w61c-c-cmwaaflitypetk017.jpg "/>

10. Set the database, log files, and SYSVOL storage location and click "Next" to continue:

650) this.width=650; "height=" 439 "alt=" wkiol1w618chvsopaafmihjikew186.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a0/wkiol1w618chvsopaafmihjikew186.jpg "/>

11. Enter the directory Restore Mode password and click "Next" to continue:

650) this.width=650; "height=" 438 "alt=" wkiom1w61c-yoqxcaaes81z_xy8857.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61c-yoqxcaaes81z_xy8857.jpg "/>

12. The Domain service installation Information Summary confirmation, click "Next" to continue:

650) this.width=650; "height=" 438 "alt=" wkiol1w618dqpiwoaafgol58mbi580.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w618dqpiwoaafgol58mbi580.jpg "/>

13. Wait for the installation to complete and restart the server when finished:

650) this.width=650; "height=" 438 "alt=" wkiom1w61c_rsnsjaaee5tva49q385.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a3/wkiom1w61c_rsnsjaaee5tva49q385.jpg "/>

14. Check the domain service success after reboot:

650) this.width=650; "height=" 508 "alt=" wkiom1w61c_y7rs3aahjfpscloc659.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a3/wkiom1w61c_y7rs3aahjfpscloc659.jpg "/>

4.3 , migrating server Roles :

1. Enter netdom query FSMO to view the current domain role location:

650) this.width=650; "height=" 357 "alt=" wkiol1w618dbcd67aadvd-okmqm528.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a0/wkiol1w618dbcd67aadvd-okmqm528.jpg "/>

2. The command line migration server role steps are as follows:

2.1. Input command Ntdsutil

2.2. Input command Roles

2.3. Input command Connections

2.4. Input command connect to server BJDCN, connect BJDCN Controller

2.5. Input command QUIT

2.6. Enter Transfer infrastructure master Command, transfer the infrastructure master to BJDCN

650) this.width=650; "height=" 356 "alt=" wkiol1w618gatzmuaaeyqnzh7fq992.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a0/wkiol1w618gatzmuaaeyqnzh7fq992.jpg "/>

650) this.width=650; "height=" 356 "alt=" wkiom1w61dcsnpnlaahz6if8qy0206.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a3/wkiom1w61dcsnpnlaahz6if8qy0206.jpg "/>

2.7. Enter the Transfer naming master command to transfer the domain naming master to BJDCN

650) this.width=650; "height=" 358 "alt=" wkiol1w618hrnavwaagubuouwuo656.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a0/wkiol1w618hrnavwaagubuouwuo656.jpg "/>

650) this.width=650; "height=" 355 "alt=" wkiom1w61ddtv5ccaafohs--ndo902.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a3/wkiom1w61ddtv5ccaafohs--ndo902.jpg "/>

2.8. Enter the Transfer PDC command to transfer the primary domain controller role to BJDCN

650) this.width=650; "height=" 357 "alt=" wkiol1w618gijsfwaags4s0rbzw525.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a0/wkiol1w618gijsfwaags4s0rbzw525.jpg "/>

650) this.width=650; "height=" 354 "alt=" wkiom1w61ddaosviaaforzlg48o712.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61ddaosviaaforzlg48o712.jpg "/>

2.9. Enter the Transfer RID Master command to transfer the RID master to BJDCN

650) this.width=650; "height=" 354 "alt=" wkiol1w618hzt4eqaagn0cwg8no511.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w618hzt4eqaagn0cwg8no511.jpg "/>

650) this.width=650; "height=" 356 "alt=" wkiom1w61dhjhabnaafoj-x9duu974.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a3/wkiom1w61dhjhabnaafoj-x9duu974.jpg "/>

3.0. Enter the Transfer schema Master command to transfer the schema master to BJDCN

650) this.width=650; "height=" 356 "alt=" wkiom1w61dggbgwaaagldmib3ri193.jpg "src=" http://s3.51cto.com/wyfs02/M02/70 /a3/wkiom1w61dggbgwaaagldmib3ri193.jpg "/>

650) this.width=650; "height=" 356 "alt=" wkiol1w618wcimxcaafmiolbnte292.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a0/wkiol1w618wcimxcaafmiolbnte292.jpg "/>

3.1. Enter the netdom query FSMO command to view the current host information.

650) this.width=650; "height=" 356 "alt=" wkiol1w618wt2oizaadg0kwrkce680.jpg "src=" http://s3.51cto.com/wyfs02/M00/70 /a0/wkiol1w618wt2oizaadg0kwrkce680.jpg "/>

3.2. All content of open active Directory users and Computers is migrated successfully:

650) this.width=650; "height=" 328 "alt=" wkiom1w61dsyhnqmaaesfbtigga123.jpg "src=" http://s3.51cto.com/wyfs02/M01/70 /a3/wkiom1w61dsyhnqmaaesfbtigga123.jpg "/>

The operation to upgrade Server 2003 to Server 2008 has been completed here. The next step is to supplement the 03 downgrade operation after the successful migration of Server 2003, and we look forward to more attention.

If there are insufficient articles, we welcome you to discuss in time, thank you!

This article is from the "Heard" blog, please make sure to keep this source http://wenzhongxiang.blog.51cto.com/6370734/1680411

Windows Server 2003 upgrade win Ser 2008R2 Combat Walkthrough