Windows Server 2016 does not have networking issues

First, the network decomposition of two issues, one, WLAN (wireless network), two, Ethernet (Wired network)

First, the WLAN problem solution

1. Open Server Manager

2. Add roles and Features

3. Always click Next to "Functions", tick the DirectPlay and wireless LAN service, and then continue to the next step until the installation is complete, then restart the computer. Of course, before restarting the collection of this website I think it will be more scientific.

4. Is not still unable to network Ah, not connected to the right. Drivers are not yet installed. From one to the Internet next driver software, driving life is OK (I am not advertising ah, Wood has received advertising fees, strongly protested). OK, to this step, you should have been able to even WiFi, welcome to the AH.

Second, the solution of Ethernet problem

Whether the driver software is not installed in any way wired network, is not to see the Ethernet controller that exclamation point is desperate, desperate on the right (manual sinister face).

1. Download a driver called PROWinx64 to the Intel website and unzip it to any folder. Go to the Pro1000->winx64->ndis64 folder and locate the file with the name e1d64x64 (note that the type is installation information).

2, open with Notepad, find i219-v corresponding ID should be E1570.6.3.1

3. Then find the [intel.ntamd64.6.3.1] key on top of it. Below this key to find the corresponding ID (E1570.6.3.1) that corresponds to the three rows of data copied down.

4, after burning, in the intel.ntamd64.6.3.1 under this key, there is a key called intel.ntamd64.6.3. Paste the three rows of data that you just copied to the bottom of the key. OK, save.

5. Open the Command window and execute the following two lines of command sequentially.

Bcdedit-set loadoptions disable_integrity_checks

Bcdedit-Set testsigning on

These two lines of command mean to turn on test mode to install unsigned drivers in test mode (because we have previously modified the drive profile)

Then restart the computer.

6. In the Device Manager, find the desperate Ethernet controller that is dominated by an exclamation point. right mouse button to do the following.

Update driver software--"Browse the computer for driver software--" click Browse to find the previous directory (that is, NDIS64) of the file you just modified, and then confirm the installation. If a Windows security prompt appears, click "Install this Driver". Ok. Now the desperate exclamation point should be gone, but one more thing is not done. Turn off Test mode. Open the Command window as well. Execute the following two lines of command sequentially

Bcdedit-Set loadoptions enable_integrity_checks

Bcdedit-Set testsigning OFF

The installation method of the I211 driver is the same as the i219-v, except that the corresponding file is not in the NDIS64 folder, but in the e1r63x64 file in the NDIS63 folder. and I217-v and I218-v both and i219-v a file, here does not elaborate

OK, restart the computer, bye.

Welcome reprint but please specify the source http://www.cnblogs.com/Goshinki/p/7514398.html

Windows Server 2016 does not have networking issues