The only inconvenient thing about Portable laptops is that if the system crashes, it is quite troublesome to do the system. After studying this weekend, I finally learned how to use a USB flash drive as a boot disk to create a new system for the notebook. I think this method is much easier than recovering from an optical drive, so I will share it with my friends in the jar.
Let's first introduce the two major protagonists, Kingston's 8g USB flash drive and the glory 81005 notebook. I started my 81005 million books a year ago and suffered a serious virus intrusion during the Chinese New Year. The system has never been too smooth since anti-virus, but I am busy with my work, there is no time to create a new system. Today is relatively idle, so I am determined to let the old system out.
U disk boot disk production:
1. USB flash drive formatting: We recommend that you use a USB flash drive with a capacity of more than 1 GB (because you need to copy the system and USB flash drive boot software, you must have enough space ), first FLASH Boot format the U disk into a USB-HDD or one of the two modes of USB-ZIP, I chose this mode of USB-ZIP, just this kind of holida notebook can be very good support.
2. USB flash drive winpe: I think it is difficult to install XP under DOS. So I am going to use the USB flash drive winpe to start and execute the XP system installation. Later, the test is feasible. I downloaded the old peach winpe USB flash drive on the Internet. In addition to winpe, there are also various common tools in it. After decompression, I just need to copy all the files into the formatted USB flash drive.
Windows XP system installation:
1. Set the USB flash drive to start: Press f2 to enter BIOS settings after the boot, enabled the third USB boot option in the boot menu, and save and exit the BIOS settings.
2, will be prepared before the XP installation disk copy into the U disk, and then insert the U disk and boot, directly into the U disk boot, the boot menu appears, choose to start micro WIN-PE (by old hair
Peach), it enters the winpe system. Copy the XP installation disk from the USB flash drive to a partition other than Area C in the small version. I have two partitions, namely, copy them to Area D, and then directly run
The setup. EXE file displays the familiar XP installation interface. Follow the prompts to complete the installation step by step.
I do not like to use the online ghost installation disk. I feel that step-by-step normal installation is more stable. After all the installation is complete, back up the gohst to facilitate future recovery. If you are used
If you use the ghost recovery method to install the system, copy the image file to the USB flash drive and copy it to a partition other than the current zone C. Use the Norton ghost32 in the old peach winpe to restore the system directly.
You can go back to Zone C.