XILINXSDK about setting up the terminal in commissioning

The SDK provides a simple terminal. It is simple enough for text output, but you may prefer different terminals like Tara. Now, we'll show you how to leverage the SDK terminal.

tab to switch to stdio. Select Port USB UART and set the baud rate to 115200. This is a fixed hardware setting that is determined by the hardware platform, click Apply, and then click Run. You can monitor the progress download in the lower right corner

(baudrate) The rate of the analog line signal, also called the modulation rate, measured by the number of oscillations per second of the waveform.　　If the data is not compressed, the baud rate equals the number of bits transmitted per second, and if the data is compressed, the number of data bits transmitted per second is usually greater than the modulation rate, making the exchange use baud and bits per second occasionally producing errors. The baud rate refers to the modulation rate of the data signal to the carrier, which is represented by the number of times the carrier modulation state changes in the unit time, which is the baud (Baud).　　The relationship between baud rate and bit rate is the bits number of bit rate = baud rate x single modulation state. In the information transmission channel, the signal unit that carries the data information is called the code element, and the number of code elements transmitted through the channel is called the code element transmission rate, referred to as the baud rate.　　The baud rate is the indicator of the bandwidth of the transmission channel. The amount of information transmitted over a channel per second is called a bit transfer rate, or bit rate. The bitrate represents the transfer rate of valid data.

Copyright NOTICE: This article for Bo Master original article, without Bo Master permission not reproduced.

XILINXSDK about setting up the terminal in commissioning