You have full knowledge of the initial default password for hundreds of ADSL routers! (1)

The following are some default initial IP addresses, user names, and passwords used for Factory installation of ADSL, which must be known for debugging.

There are three methods to debug these settings:

One of the most common WEB methods is to fill in an exciting IP address in the browser, for example, QX1680. In the browser address bar, enter the IP address 10.0.0.2. When the prompt bar appears, enter the User Name admin, password qxcommsupport, you can set the administrator interface. This method is the most common and simple one.

The second method is to use TELNET to telnet the IP address, for example, early co-operation 642, telnet 192.168.1.1, and then enter the password 1234 to enter the English character interface.

The third method is to use the vendor's own configuration program to enter the configuration interface. For example, CyberLink 6307/6309 uses dslcom.exe in the optical disk with Cybrlink 6307/6309 kg. the default value is: Route IP Address: 1 92.161.1 password: stm, because this method is not as convenient as the first two methods, low-end products are rarely used. Debugging of most products requires that the dual-stranded wires of the product be connected first, and then the IP address of the NIC of the local machine be set to the same network segment as that of the dual-stranded wires, if the default IP address or password is changed, most of them can be reset to restore the default value. The most common and useful method is to keep holding down the reset key after power-off, and then power-on until it can be restored after a short period of time.

Shanghai Daya technology 108

Http: // 192.168.1.1/

Username: admin password: password

Emma 701 GB

192.168.101.1 192.168.0.1

Username: admin Password: admin

Username: SZIM password: SZIM

Emma 701 H

192.168.1.1 10.0.0.2

Username: admin Password: epicrouter

Actually reaches 2110EH ROUTER

192.168.10.1

Username: user password: password

Username: root Password: grouter

Digital China/ASUS:

Username: adsl password: adsl1234

Omnidirectional:

Username: root Password: root

Putian:

Username: admin Password: dare

E-tek

Username: admin Password: 12345

Zyxel

Username: anonymous password: 1234

Beidian

Username: anonymous password: 12345

Daheng

Username: admin Password: admin

Datang

Username: admin Password: 1234

Sweet

Username: root Password: root

User name: user Password: user

ZTE

Username: adsl password: adsl831

Viking

Account: adsl password: adsl1234

Account: root Password: grouter

Huawei mt800

Account: admin Password: admin

Home gateway

Account: user password: password

Account: admin Password: epicrouter

Omnidirectional QL1680

IP address 10.0.0.2

Username: admin, password: qxcomm1680,

Administrator Password: qxcommsupport.

Omnidirectional QL1880

IP address 192.168.1.1

Username: root, password: root

Omnidirectional QL1688

IP address 10.0.0.2

The username is admin, And the password is qxcomm1688.

TP-LINK TD-8800

192.168.1.1

Account Name admin, password admin

Co-Qin zyxel 642

Enter telnet 192.168.1.1

Password 1234

Ecom ED-802EG

192.168.1.1

Root User Name

Password root

Shenzhou digital 6010RA

192.168.1.1

Username ADSL

Password ADSL1234

Huawei SmartAX MT800

192.168.1.1

User Name ADMIN

Password ADMIN