Youxun Wireless Router Network Configuration Diagram

For users who use youxun DI-524M wireless router, to connect to the network needs to configure the Router Network.
1. Open the browser, type 192.168.0.1 in the address bar of the browser, and click Enter to Enter the vro logon interface.
2. On the logon page that appears, enter admin as the user name. The password is blank by default. Then, click Login to enter the following configuration interface.
There are two ways to set the network connection of youxun DI-524M wireless router:
(1) Click the Configuration Wizard to display the network connection setting steps, and click Next to set up.
(2) Click the network connection wizard to configure the network.
3. Click Next and set the password in the window below.
4. By default, enter the management password of the user DI-524M wireless router configuration interface is empty, in order to ensure the security of the device, you can set a password, to prevent others from changing the configurations of your vro. Www.2cto.com
5. Select GMT + time zone from the drop-down list in China and click Next to set the network connection.
6. There are three options: DHCP connection (Dynamic IP address), user name/password connection (PPPoE mode), and fixed IP address connection. DHCP connection (Dynamic IP address) is used by default ). (1) When the computer is directly connected to ADSL or Cable Modem, you must specify another fixed IP address before connecting to the network. (2) when the computer is directly connected to ADSL or Cable Modem, you do not need to make any connection settings to connect to the network, select DHCP connection; (3) when the computer is directly connected to ADSL Modem, if you need to set the ADSL account/password and connect to the network, select PPPoE. 7. The system status interface shows that PPPoE has been connected, and the WAN end of youxun DI-524M wireless router also obtains the IP address information allocated by the Telecommunications Department.
The above Network Connection Setup Wizard only needs to be done once, after the rest of the computer only needs to do TCP/IP settings in the operating system, you know DI-524M Wireless Router network connection part of the configuration is complete. This article is from