Zabbix adding fan speed monitoring to Windows clients, etc...

Connect to the above:

Zabbix adding monitoring of the Windows Client CPU temperature: http://blog.51cto.com/mikeyoo/2046571

In this article through the use of SpeedFan monitoring log function to achieve the CPU temperature monitoring, but the SpeedFan monitoring project more than the temperature of this one, let's take advantage of this!

To add monitoring of CPU fan speed

First open SpeedFan Add the log to the fan

PS: My This machine detects two fans, not sure which is the CPU fan, so download the master of Lu to run the CPU, and then can observe the FAN1 speed directly pull up, so you can determine FAN1 is the CPU fan

SpeedFan adding the log to the fan after the completion of the following is to extract the speed from the CSV

To test first, copy Temp.bat to Cpufan.bat

Then put "Tail-1 sflog%nowdate%.csv | awk "{print $}"

Modified to "Tail-1 Sflog%nowdate%.csv | awk "{print $}"

Add pause Save, test

You can see that the resulting data is consistent and then you can delete the pause save

Modify zabbix_agentd.win.conf Below

Added: Userparameter=cpu_fan,c:\zabbix\cpufan.bat

Save, and then restart the Zabbix agent service

Add monitoring of CPU fan in the Zabbix server, and the same as for temperature monitoring

have successfully added no error

Also need to add a graph of fan speed

Add Save

With Lu Master ran a bit, you can see the fan speed change, because the set of sampling is 30s so the graphics are not so smooth, we can set according to their own needs

Also can be based on this method to add to the hard disk temperature monitoring, video card temperature monitoring and so on ...

---END---

Zabbix adding fan speed monitoring to Windows clients, etc...