Zabbix Monitoring Switch settings

Description

The Zabbix monitoring server is already configured, and the switch is now monitored using Zabbix.

Specific operation:

The following operations are performed on the monitored switch, where Cisco switches are the example.

First, log on to the Cisco switch and turn on the SNMP service

Note: Log in to switch privileged configuration mode using Telnet or emulation terminal

Enable #切换到特权模式

Configure Terminal #进入全局配置模式

Snmp-server Community public ro #打开交换机snmp服务, set community name to public, read-only

Snmp-server community Cisco RW #打开交换机snmp服务, set the community name to Cisco, read/write

Snmp-server Enable traps #启用snmp陷阱

Exit #退出全局配置模式

Show Run #查看当前配置信息

Exit #退出特权模式

Second, use Getif to view the switch port information

Download Getif:http://www.wtcs.org/snmp4tpc/files/tools/snmp/getif/getif-2.3.1.zip

After the installation is complete, open the software

Note: Windows 7/8/8.1 system needs to right-click, choose to run as Administrator, or software open failed!

Host Name: Switch IP address

Read: Public

Other default

Point start

After the connection succeeds as shown:

System operation and maintenance www.osyunwei.com warm reminder: qihang01 original Content © Copyright, reproduced please indicate the source and the original chain

Switch to the Interface tab, click Start to view all port information for the switch, and record it as shown:

Switch to the Mbrowser tab

Select iso->org->dod->internet->mgmt->mib-2->interface->iftable->ifentry->ifinoctets

Point start

After the connection succeeds as shown:

Attention:

Ifinoctets #交换机端口进流量

Ifoutoctets #交换机端口出流量

To view switch port outbound traffic:

Iso->org->dod->internet->mgmt->mib-2->interface->iftable->ifentry->ifoutoctets

The interfaces.iftable.ifentry.ifinoctets.1 corresponds to the Vlan1 interface of the switch , whose OID value is:1.3.6.1.2.1.2.2.1.10.1

The interfaces.iftable.ifentry.ifinoctets.5179 corresponds to the StackPort1 interface of the switch , whose OID value is:1.3.6.1.2.1.2.2.1.10.5179

The interfaces.iftable.ifentry.ifinoctets.10101 corresponds to the GIGABITETHERNET1/0/1 interface of the switch , and its OID value is: 1.3.6.1.2.1.2.2.1.10.10101

And so on

Depending on the int value in the Interface tab, view the OID value of the port on the current switch, and then use the OID value in Zabbix to monitor the switch port.

The ports and OID values for Cisco switches are listed here

1. C3750E Port

Ifinoctets #进口流量1.3.6.1.2.1.2.2.1.10.

Ifoutoctets #出口流量1.3.6.1.2.1.2.2.1.16.

1 Vlan1

5179 StackPort1

5180 stacksub-st1-1

5181 Stacksub-st1-2

10101 GIGABITETHERNET1/0/1

10102 GIGABITETHERNET1/0/2

10103 GIGABITETHERNET1/0/3

10104 GIGABITETHERNET1/0/4

10105 GIGABITETHERNET1/0/5

10106 GIGABITETHERNET1/0/6

10107 GIGABITETHERNET1/0/7

10108 GIGABITETHERNET1/0/8

10109 GIGABITETHERNET1/0/9

10110 GIGABITETHERNET1/0/10

10111 GIGABITETHERNET1/0/11

10112 GIGABITETHERNET1/0/12

10113 GIGABITETHERNET1/1/1

10114 GIGABITETHERNET1/1/2

10115 GIGABITETHERNET1/1/3

10116 GIGABITETHERNET1/1/4

10201 TENGIGABITETHERNET1/1/1

10202 TENGIGABITETHERNET1/1/2

14501 Null0

14502 FastEthernet0

2. c2960s Port

Ifinoctets #进口流量1.3.6.1.2.1.2.2.1.10.

Ifoutoctets #出口流量1.3.6.1.2.1.2.2.1.16.

1 Vlan1

10101 GIGABITETHERNET0/1

10102 GIGABITETHERNET0/2

10103 GIGABITETHERNET0/3

10104 GIGABITETHERNET0/4

10105 GIGABITETHERNET0/5

10106 GIGABITETHERNET0/6

10107 GIGABITETHERNET0/7

10108 GIGABITETHERNET0/8

10109 GIGABITETHERNET0/9

10110 GIGABITETHERNET0/10

10111 GIGABITETHERNET0/11

10112 GIGABITETHERNET0/12

10113 GIGABITETHERNET0/13

10114 GIGABITETHERNET0/14

10115 GIGABITETHERNET0/15

10116 GIGABITETHERNET0/16

10117 GIGABITETHERNET0/17

10118 GIGABITETHERNET0/18

10119 GIGABITETHERNET0/19

10120 GIGABITETHERNET0/20

10121 GIGABITETHERNET0/21

10122 GIGABITETHERNET0/22

10123 GIGABITETHERNET0/23

10124 gigabitethernet0/24

10125 GIGABITETHERNET0/25

10126 GIGABITETHERNET0/26

10127 GIGABITETHERNET0/27

10128 GIGABITETHERNET0/28

10129 GIGABITETHERNET0/29

10130 GIGABITETHERNET0/30

10131 Gigabitethernet0/31

10132 GIGABITETHERNET0/32

10133 GIGABITETHERNET0/33

10134 Gigabitethernet0/34

10135 GIGABITETHERNET0/35

10136 GIGABITETHERNET0/36

10137 GIGABITETHERNET0/37

10138 GIGABITETHERNET0/38

10139 GIGABITETHERNET0/39

10140 GIGABITETHERNET0/40

10141 GIGABITETHERNET0/41

10142 GIGABITETHERNET0/42

10143 GIGABITETHERNET0/43

10144 GIGABITETHERNET0/44

10145 GIGABITETHERNET0/45

10146 GIGABITETHERNET0/46

10147 GIGABITETHERNET0/47

10148 GIGABITETHERNET0/48

10149 GIGABITETHERNET0/49

10150 gigabitethernet0/50

12001 Null0

12002 FastEthernet0

3. C3560 Port

Ifinoctets #进口流量1.3.6.1.2.1.2.2.1.10.

Ifoutoctets #出口流量1.3.6.1.2.1.2.2.1.16.

1 Vlan1

10101 GIGABITETHERNET0/1

10102 GIGABITETHERNET0/2

10103 GIGABITETHERNET0/3

10104 GIGABITETHERNET0/4

10105 GIGABITETHERNET0/5

10106 GIGABITETHERNET0/6

10107 GIGABITETHERNET0/7

10108 GIGABITETHERNET0/8

10109 GIGABITETHERNET0/9

10110 GIGABITETHERNET0/10

10111 GIGABITETHERNET0/11

10112 GIGABITETHERNET0/12

10113 GIGABITETHERNET0/13

10114 GIGABITETHERNET0/14

10115 GIGABITETHERNET0/15

10116 GIGABITETHERNET0/16

10117 GIGABITETHERNET0/17

10118 GIGABITETHERNET0/18

10119 GIGABITETHERNET0/19

10120 GIGABITETHERNET0/20

10121 GIGABITETHERNET0/21

10122 GIGABITETHERNET0/22

10123 GIGABITETHERNET0/23

10124 gigabitethernet0/24

10125 GIGABITETHERNET0/25

10126 GIGABITETHERNET0/26

10127 GIGABITETHERNET0/27

10128 GIGABITETHERNET0/28

10129 GIGABITETHERNET0/29

10130 GIGABITETHERNET0/30

10131 Gigabitethernet0/31

10132 GIGABITETHERNET0/32

10133 GIGABITETHERNET0/33

10134 Gigabitethernet0/34

10135 GIGABITETHERNET0/35

10136 GIGABITETHERNET0/36

10137 GIGABITETHERNET0/37

10138 GIGABITETHERNET0/38

10139 GIGABITETHERNET0/39

10140 GIGABITETHERNET0/40

10141 GIGABITETHERNET0/41

10142 GIGABITETHERNET0/42

10143 GIGABITETHERNET0/43

10144 GIGABITETHERNET0/44

10145 GIGABITETHERNET0/45

10146 GIGABITETHERNET0/46

10147 GIGABITETHERNET0/47

10148 GIGABITETHERNET0/48

10149 GIGABITETHERNET0/49

10150 gigabitethernet0/50

10151 GIGABITETHERNET0/51

10152 GIGABITETHERNET0/52

10501 Null0

Iii. adding monitoring to the switch in the Zabbix

1. Add Host

Open Zabbix

Configuration-Host group-create host group

System operation and maintenance www.osyunwei.com warm reminder: qihang01 original Content © Copyright, reproduced please indicate the source and the original chain

Group Name: Switch

Archive

Configuration-host-Create host

Host Name: Switch IP

Groups: Select the switch created in the previous step

SNMP interface-IP address: Switch IP

Other default

Status: Under test

Archive

2. Create a switch monitoring template

Open Zabbix

Configuration-Templates-Create templates

Template name: Cisco c3750e

Groups: Switches

Host/Template: Select the switch IP you just added

Archive

3. Create a template monitoring project

Host-template, select the template you just created Cisco C3750E

Open the project as shown in:

Create new monitoring

Here we monitor the import traffic of the Cisco C3750E switch Port GIGABITETHERNET0/1

Name: GIGABITETHERNET0/1 in

Type:SNMPV2 endpoint Agent

Key value: ifinoctets.10101

SNMP OID:1.3.6.1.2.1.2.2.1.10.10101

SNMP Community: Public

Data type: Digital (no plus or minus)

Data type: decimal number

Unit:bps

Use custom multiples: Hook 8

Data Update interval: 60

History storage period (in days): 7

Trend storage period (in days): 365

Storage value: difference (rate per second)

Display value: Unchanged

Archive

4. Create a monitoring graphic

Configuration-Host

Select the switch ip-graphic you just created

As shown in the following:

Create a graphic

Name: GIGABITETHERNET0/1 in

Add, Select the monitoring project you just created

Archive

5. View monitoring Status

Open Zabbix

In-Test-graphics

Groups: Switches

Host: Switch IP

Graphics: GIGABITETHERNET1/0/1

As shown

At this point, the ZABBIX monitoring switch setup is complete.

Note: Cisco switch CPU and memory monitor OID values

CPU load (percent) in 5 seconds enterprises.9.2.1.56.0

Snmpwalk-v 2c-c Test IP 1.3.6.1.4.1.9.2.1.56.0

CPU load (percent) in 1 minutes

Snmpwalk-v 2c-c Test IP 1.3.6.1.4.1.9.2.1.57.0

CPU load (percent) in 5 minutes

Snmpwalk-v 2c-c Test IP 1.3.6.1.4.1.9.2.1.58.0

Get Memory usage

Snmpwalk-v 2c-c Test IP 1.3.6.1.4.1.9.9.48.1.1.1.5

Get Memory Idle condition

Snmpwalk-v 2c-c Test IP 1.3.6.1.4.1.9.9.48.1.1.1.6

Current Memory usage

enterprises.9.9.48.1.1.1.5.1

1.3.6.1.4.1.9.9.48.1.1.1.5.1

1.3.6.1.4.1.9.9.48.1.1.1.5.2

1.3.6.1.4.1.9.9.48.1.1.1.5.16

Zabbix Monitoring Switch settings