014 installing the Linux system to the Development Board

SD Card-----> Development Board

1, Installation Preparation:

Hardware connection

USB Download cable, one end connected to the Development Board, the other end connected to the PC;

Serial cable connection is good;

The power cord is connected well;

Set up the Development Board from SD card;

2, open the Development Board to enter the menu interface:

The way to enter the menu interface: Press and hold the spacebar to open the power of the Development Board;

　　

Embedded Linux system is composed of bootloader, Linux kernel and file system, which is installed in order to install the three parts in sequence;

Before installing, the NAND flash is formatted first, select the first item, enter 1;

　　

　　

　　

After the format is finished, first download the bootloader, select "3", then the submenu will appear, click "1" in the submenu, then the development Board waits, waits for the file we will download to pass it, we need to transfer these files from the virtual machine, before transferring the files, First of all, install the USB download cable driver,

　　

　　

　　

014 installing the Linux system to the Development Board