1. Cisco switch QoS speed limit configuration

Cisco switch QoS Speed limit configuration steps:

1. Enable Global QoS

2. Set the ACL matching traffic

3. Set a class-map to match the ACL set in the second step

4, set a Policy-map match Class-map, and then define a series of policies here, limit the bandwidth bitwise (BIT) for the calculation, burst in bytes (byte) calculation

5, apply the POLICY-MAP to the corresponding interface

MLS QoS

IP Access-list Extended list83

Permit IP host 192.168.120.83 any

Class-map class83

Match Access-group name List83

Policy-map policy83

Class Class83

Trust DSCP

Police 5000000 80000 exceed-action drop

Interface F0/11

Service-policy input policy83

1. Cisco switch QoS speed limit configuration