After completing the preceding settings, restart the system to automatically disconnect the default shared channel for Windows XP. If you have more hard disks, go to net share d.$Add it under/del, such as net share e.$/Del, net share f$/Del.
6th important events: enabling the DMA Transmission Mode
After the DMA mode is enabled, the computer's peripheral devices (mainly hard disks) can directly exchange data with the memory, which can speed up hard disk reading and writing and improve data transmission rate: Open the "Device Manager ", under "ide ata/ATAPI controller", there are "primary IDE channel" and "secondary IDE channel". Double-click it and click "Advanced Settings ", this dialog box lists the transmission modes of the devices connected to the current IDE interface. Click the list button to set "transmission mode" to "DMA (if available)" and restart the computer to take effect.
7th events: enable advanced power management
Sometimes, before Windows XP is installed, you will find that the advanced power control in the BIOS is not enabled. After Windows XP is installed, the power will not be automatically disconnected when Windows is disabled. At this time, many people choose to re-enable the advanced power control in the BIOS and reinstall Windows XP. As a matter of fact, you don't need to be so troublesome, as long as you confirm that you have enabled the advanced power control option in the BIOS, and thenHttp://www.yaguo.com /~ Mig25/acpi.exeDownload and install this program, and select ACPI Pc. Do not select an error. Otherwise, you may not be able to enter Windows after the restart) and restart the computer, the computer may re-search and automatically reinstall the computer's hardware so that it can support advanced power control.
8th important events: Support for Uncompressing folders
Click Start → run. Enter "regsvr32/u zipfldr. dll" and press Enter. The prompt "dll UnrgisterServer in zipfldr. Dll is successful" appears to cancel the support for Windows XP compressed folders. In addition, you can enter regsvr32 shdocvw. dll to cancel the association between "image and fax" and image files.
9th important events: cancelling the "insufficient disk space" Notification
When the disk drive capacity is less than MB, Windows XP will send a "insufficient disk space" notification, which is very annoying. You can open registry editor, go to HKEY_CURRENT_USERSoftwareMi crosoftWindowsCurrentVersionPolicies Explorer, right-click "Explorer", and choose "New"> "DWORD Value" from the shortcut menu ", name the value "NoLowDiskSpaceChecks" and double-click the value to set "value data" to "1"
10th important events: enable verification code
After SP2 is installed, most users find that the verification code image (displayed as a Red Cross) cannot be displayed when accessing some places where the verification code needs to be entered. This is a very serious Bug. Solution: run the "Regedit" command to open the Registry Editor and choose [HKEY _ LOCAL_MACHINESOFTWAREMicrosoftInternet Explorer Security]. create a REG _ DWORD Value named "BlockXBM" on the right of the window and set it to "0" (hexadecimal value ).