11-SCVMM2012 Create a virtual network

4.6. Create a virtual network
SCVMM can configure a logical switch or standard switch for a Hyper-V host.
The so-called standard switch, which is the virtual network configured on the Hyper-V host, does not configure port bandwidth through SCVMM, and if you are configuring virtual machine bandwidth, you can only configure the VMS separately through Hyper-V Manager or Cluster Administrator. By establishing a standard switch for Hyper-V through SCVMM, a network card on a Hyper-V host is mapped, and if the host does not do NIC teaming, multiple standard switches need to be made to make full use of multiple NICs, or a NIC group is established to map a standard switch to a virtual NIC group. The work is completely manual, and the workload is acceptable for a few host environments, but it is cumbersome for a slightly larger environment, so it is recommended to use a logical switch.
A logical switch is a distributed switch on SCVMM that aggregates the virtual networks of individual hosts and sees them as a large core switch on a network topology. In this way, it is very convenient to manage. The logical switch is built in SCVMM and the upstream port is set up, and the Hyper-V host automatically makes a combination of multiple NICs when creating the virtual network, which is advantageous for large-volume deployment hosts.
Now let's start building a logical switch.
4.6.1, creating a network site
By default, SCVMM suggests a logical virtual network, such as

650) this.width=650; "title=" 01.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5D/FC/ Wkiol1uoqeybsixuaagjrmpeosy372.jpg "alt=" wkiol1uoqeybsixuaagjrmpeosy372.jpg "/> Double-click the default logical network, switch to the network site, click " Add "

650) this.width=650; "title=" 02.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5E/00/ Wkiom1uoqkcdxbu1aahwgtifdwy576.jpg "alt=" wkiom1uoqkcdxbu1aahwgtifdwy576.jpg "/> Check host group, then insert VLAN and IP Subnets, change the network site name, click OK, you can add a network site

650) this.width=650; "title=" 03.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M02/5D/FC/ Wkiol1uoqe6ttcvxaaj4jxkgkjs594.jpg "alt=" wkiol1uoqe6ttcvxaaj4jxkgkjs594.jpg "/> added two network sites

650) this.width=650; "title=" 04.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M02/5E/00/ Wkiom1uoqkoyr-1naakbeezrafk676.jpg "alt=" Wkiom1uoqkoyr-1naakbeezrafk676.jpg "/>

4.6.1. Configuring the upstream port
Right-click the port profile to create the Hyper-V port configuration file

650) this.width=650; "title=" 01.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5D/FC/ Wkiol1uoqpsanxuvaakwkbbj73m935.jpg "alt=" wkiol1uoqpsanxuvaakwkbbj73m935.jpg "/> input Hyper-V the port profile name, along with the algorithm and combination mode of the upstream port configuration file, is as follows, click " Next Step "

650) this.width=650; "title=" 02.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5E/00/ Wkiom1uoqund2nqzaai5iklktby074.jpg "alt=" wkiom1uoqund2nqzaai5iklktby074.jpg "/> check the network site name, click " Next Step "

650) this.width=650; "title=" 03.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M02/5D/FC/ Wkiol1uoqpbt646taaiw6ukoq7c701.jpg "alt=" wkiol1uoqpbt646taaiw6ukoq7c701.jpg "/> Click Finish

650) this.width=650; "title=" 04.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M02/5E/00/ Wkiom1uoquucikdmaaf0r_52jys673.jpg "alt=" wkiom1uoquucikdmaaf0r_52jys673.jpg "/> under the port profile, you can see the configuration file you just created

650) this.width=650; "title=" 05.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M00/5D/FC/ Wkiol1uoqpigvlcaaaiiflvzejm995.jpg "alt=" Wkiol1uoqpigvlcaaaiiflvzejm995.jpg "/>

4.6.3, creating logical networks

to create a new logical network, perform the following operations, in turn, to construct à Creating a logical network

650) this.width=650; "title=" 01.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M02/5E/00/ Wkiom1uoqitb1djvaaggntpz8wu933.jpg "alt=" wkiom1uoqitb1djvaaggntpz8wu933.jpg "/> Enter the name, and select the Logical Network option, click " Next Step "

650) this.width=650; "title=" 02.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5D/FC/ Wkiol1uoq3gi36uaaakpkxxgq_g564.jpg "alt=" wkiol1uoq3gi36uaaakpkxxgq_g564.jpg "/> click Add

650) this.width=650; "title=" 03.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M00/5D/FC/ Wkiol1uoq3lxqhllaagiktykhqg083.jpg "alt=" Wkiol1uoq3lxqhllaagiktykhqg083.jpg "/>

Tick Host Group Association VLAN , click " Next Step "

650) this.width=650; "title=" 04.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M00/5E/00/ Wkiom1uoqiei2c9naajltv470qc502.jpg "alt=" wkiom1uoqiei2c9naajltv470qc502.jpg "/> Click Finish to complete the establishment of the logical network

650) this.width=650; "title=" 05.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5D/FC/ Wkiol1uoq3szf7l8aafghknrxp8918.jpg "alt=" wkiol1uoq3szf7l8aafghknrxp8918.jpg "/> back to logical network node, you can see the logical network you just created

650) this.width=650; "title=" 06.png "style=" Float:none; "src=" http://s3.51cto.com/wyfs02/M01/5E/00/ Wkiom1uoqijzgf-naagn4scr1bi640.jpg "alt=" Wkiom1uoqijzgf-naagn4scr1bi640.jpg "/>

This article from "Robin's Home" blog, declined reprint!

11-SCVMM2012 Create a virtual network