1100/3300 basic vswitch Configuration

3Com 11/3300 vswitch is a layer 2 vswitch launched by 3Com. It does not have the routing function and supports virtual networks between vswitches. Provides traffic control and other functions. The basic configuration is relatively simple. You only need to configure a user name and password and give it an IP address. For the current development of the network, it is generally used as the second or third-level switch. In addition, the 3Com11/3300 Switch has excellent stacking function and supports a high backboard rate, meet the requirements of high-bandwidth networks.

The specific configuration is as follows:

For the 3Com 11/3300 Switch configuration, it is usually configured through the serial port. 11/3300 has three logon methods with different permissions: read, write, and admin.

Use admin login for configuration. The initial password is press Enter.

1. Select Ethernet Management

Select menu option: Ethernet

2. Activate or disable the specified port

Select menu option (Ethernet): portstate

Select Ethernet port: (specify the port and specify disable or enable)

3. display port status

Select menu option (Ethernet): statistics

Select Ethernet port: Select a port.

4. display the port setting status and running information

Select menu option (Ethernet): summary

Select a port.

5. set IP Address Management

Start bootp: Select menu option (IP interface): bootp

Enable.

Define IP addresses

Select menu option (IP interface): define

Enter IP address: 10.1.0.2

Enter subnet mask: 255.255.0.0

Enter default gateway: 10.1.0.1

6. Set Username and Password.

It is already SuperStack III!