15 practical Linux/Unix tape management commands for the system administrator
Tape equipment should only be used for regular file archiving or data is transferred from one server to another. Generally, tape devices are connected to Unix machines and controlled by mt or MTCs. We strongly recommend that you back up all data to disks (maybe in the cloud) and tape devices at the same time. In this tutorial, you will learn:
Why backup?
A backup plan is necessary for regular backup of files. If you prefer not to back up files, the risk of losing important data is greatly increased. With backup, you can recover from a disk failure. Backup can also help you resist:
You can use tape archive to back up the entire server and store it offline.
Understanding tape file tags and block sizes
Figure 01: tape file tag
Each tape device can store multiple backup files. The tape backup file is created using commands such as cpio, tar, and dd. At the same time, tape devices can be opened, written, and closed by a variety of programs. You can store several backups (Tape files) to a physical tape. There is a "tape file tag" between each tape file ". This indicates the end of a tape file on a physical tape and the start of another file. You need to use the mt command to locate the tape (fast forward, rewind, and tag ).
How is data stored on tape?
Figure 02: how the data on the tape is stored
All data is stored continuously in tar continuous tape storage format. The first tape archive starts from the physical start of the tape (tar #0 ). The following is tar #1, and so on.
Unix tape device name
Tape device name example
How do I List Installed scsi tape devices?
Enter the following command:
###Linux (see man for more information)### Lsscsi Lsscsi -g ### IBM AIX ### lsdev -Cc tape lsdev -Cc adsm lscfg -vl rmt* ### Solaris Unix ### Cfgadm – a Cfgadm -al Luxadm probe Iostat -En ### HP-UX Unix ### Ioscan Cf ioscan -funC tape ioscan -fnC tape ioscan -kfC tape
Output example from my Linux Server:
Figure 03: tape devices installed on Linux servers
Mt command example
On Linux and Unix-like systems, the mt command is used to control operations on the tape drive, such as viewing the status or searching for files on the tape or writing the tape control flag. Most of the following commands must be executed as root users. Syntax:
mt -f /tape/device/name operation
Set Environment
You can set the TAPE shell variable. This is the path name of the tape drive. On FreeBSD, the default value (if the variable is not set, rather than null) is/dev/NSAID 0. You can use the-f parameter of the mt command to pass the variable to overwrite it, as described below.
###Add to your shell profile### TAPE=/dev/st1 #Linux TAPE=/dev/rmt/2 #Unix TAPE=/dev/nsa3 #FreeBSD Export TAPE
1: Display tape/drive status
mt status ### Use default mt -f /dev/rmt/0 status ### Unix mt -f /dev/st0 status ### Linux mt -f /dev/nsa0 status ### FreeBSD MT - F / dev / RMT / 1 Status - UNIX unit 1, i.e. tape device No. 1
You can use a shell loop statement to traverse a system and locate all its tape drives as follows:
for d in 0 1 2 3 4 5
do
mt -f "/dev/rmt/${d}" status
done
2: rewind
mt rew mt rewind mt -f /dev/mt/0 rewind mt -f /dev/st0 rewind
3: pop-up tape
mt off mt offline mt eject mt -f /dev/mt/0 off mt -f /dev/st0 eject
4: erase the tape (rewind, unmount the tape if supported)
mt erase mt -f /dev/st0 erase #Linux mt -f /dev/rmt/0 erase #Unix
5: tensioning the tape cartridge
If an error occurs while reading the tape, re-tensioning the tape, clean the tape drive, and try again like below:
mt retension mt -f /dev/rmt/1 retension #Unix mt -f /dev/st0 retension #Linux
6: Write the EOF tag to the current location of the tape
mt eof mt weof mt -f /dev/st0 eof
7: Move the tape forward to the specified number of file tags, that is, skipping the specified EOF tag
The tape is located at the first block of the next file, that is, the tape is located at the first block of the next area (see Figure 01 ):
mt fsf mt -f /dev/rmt/0 fsf mt -f /dev/rmt/1 fsf 1 #go 1 forward file/tape (see fig.01)
8: removes the specified number of file tags from the tape, that is, the specified EOF tag is reversed.
The tape is located at the first block of the next file, that is, the tape is located after the EOF tag (see Figure 01 ):
mt bsf mt -f /dev/rmt/1 bsf mt -f /dev/rmt/1 bsf 1 #go 1 backward file/tape (see fig.01)
Here is the list of tape location commands:
FSF advances the specified number of file tags. The tape is positioned in the first block of the next file. Fsfm advances the specified number of file tags. The tape is positioned on the last block of the previous file. BSF backs up the specified number of file tags. The tape is positioned on the last block of the previous file. BSfm backs up the specified number of file tags. The tape is positioned in the first block of the next file. The ASF tape is positioned at the beginning of the specified number of file tags. Positioning is achieved by rewinding first and then advancing the specified number of file tags. FSR advances the specified number of records. BSR backs up the specified number of records. FSS (SCSI tables) advances the specified setmarks. BSS (SCSI tables) backs up the specified setmarks.
Basic BACKUP command
Let's take a look at the backup and recovery commands.
9: Backup Directory (in tar format)
tar cvf /dev/rmt/0n /etc tar cvf /dev/st0 /etc
10: Restore directory (in tar format)
tar xvf /dev/rmt/0n -C /path/to/restore tar xvf /dev/st0 -C /tmp
11: list or check the tape content in tar format)
mt -f /dev/st0 rewind; dd if=/dev/st0 of=-
### tar format ###
tar tvf {DEVICE} {Directory-FileName}
tar tvf /dev/st0
tar tvf /dev/st0 desktop
tar tvf /dev/rmt/0 foo > list.txt
12: use dump or ufsdump to back up partitions
###UNIX backup c0t0d0s2 partition### ufsdump 0uf /dev/rmt/0 /dev/rdsk/c0t0d0s2 ###Linux backup / home partition### dump 0uf /dev/nst0 /dev/sda5 dump 0uf /dev/nst0 /home ###FreeBSD backup / usr partition### dump -0aL -b64 -f /dev/nsa0 /usr
12: Use ufsrestore or restore to restore a partition
It's Unix. ufsrestore xf /dev/rmt/0 ###UNIX interactive recovery### ufsrestore if /dev/rmt/0 ### Linux ### restore rf /dev/nst0 ###Interactive recovery from 6th backup on tape media### restore isf 6 /dev/nst0 ###FreeBSD recovering ufsdump format### restore -i -f /dev/nsa0
13: write from the beginning of the tape (see Figure 02)
###This overwrites all data on the tape### mt -f /dev/st1 rewind ###Back up home### tar cvf /dev/st1 /home ###Offline and unmount tape### mt -f /dev/st0 offline
Start from the beginning of the tape:
mt -f /dev/st0 rewind tar xvf /dev/st0 mt -f /dev/st0 offline
14: write data from the last tar (see Figure 02)
###This preserves previously written data### mt -f /dev/st1 eom ###Back up home### tar cvf /dev/st1 /home ###Uninstall### mt -f /dev/st0 offline
15: write after tar number 2 (see Figure 02)
###Write after tar number 2 (should be 2 + 1)### mt -f /dev/st0 asf 3 tar cvf /dev/st0 /usr ###ASF is equivalent to FSF### mt -f /dev/sf0 rewind mt -f /dev/st0 fsf 2
Restore tar from tar number 2:
mt -f /dev/st0 asf 3 tar xvf /dev/st0 mt -f /dev/st0 offline
How do I verify the Backup Tape created using tar?
It is very important to regularly perform system-wide repair and service tests. This is the only way to determine the proper operation of the entire system. For more information, see our tutorial on verifying the tar command tape backup.
Example shell script
#!/bin/bash # A UNIX / Linux shell script to backup dirs to tape device like /dev/st0 (linux) # This script make both full and incremental backups. # You need at two sets of five tapes. Label each tape as Mon, Tue, Wed, Thu and Fri. # You can run script at midnight or early morning each day using cronjons. # The operator or sys admin can replace the tape every day after the script has done. # Script must run as root or configure permission via sudo. # ------------------------------------------------------------------------- # Copyright (c) 1999 Vivek Gite <vivek@nixcraft.com> # This script is licensed under GNU GPL version 2.0 or above # ------------------------------------------------------------------------- # This script is part of nixCraft shell script collection (NSSC) # Visit http://bash.cyberciti.biz/ for more information. # ------------------------------------------------------------------------- # Last updated on : March-2003 - Added log file support. # Last updated on : Feb-2007 - Added support for excluding files / dirs. # ------------------------------------------------------------------------- LOGBASE=/root/backup/log # Backup dirs; do not prefix / BACKUP_ROOT_DIR="home sales" # Get todays day like Mon, Tue and so on NOW=$(date +"%a") # Tape devie name TAPE="/dev/st0" # Exclude file TAR_ARGS="" EXCLUDE_CONF=/root/.backup.exclude.conf # Backup Log file LOGFIILE=$LOGBASE/$NOW.backup.log # Path to binaries TAR=/bin/tar MT=/bin/mt MKDIR=/bin/mkdir # ------------------------------------------------------------------------ # Excluding files when using tar # Create a file called $EXCLUDE_CONF using a text editor # Add files matching patterns such as follows (regex allowed): # home/vivek/iso # home/vivek/*.cpp~ # ------------------------------------------------------------------------ [ -f $EXCLUDE_CONF ] && TAR_ARGS="-X $EXCLUDE_CONF" #### Custom functions ##### # Make a full backup full_backup(){ local old=$(pwd) cd / $TAR $TAR_ARGS -cvpf $TAPE $BACKUP_ROOT_DIR $MT -f $TAPE rewind $MT -f $TAPE offline cd $old } # Make a partial backup partial_backup(){ local old=$(pwd) cd / $TAR $TAR_ARGS -cvpf $TAPE -N "$(date -d '1 day ago')" $BACKUP_ROOT_DIR $MT -f $TAPE rewind $MT -f $TAPE offline cd $old } # Make sure all dirs exits verify_backup_dirs(){ local s=0 for d in $BACKUP_ROOT_DIR do if [ ! -d /$d ]; then echo "Error : /$d directory does not exits!" s=1 fi done # if not; just die [ $s -eq 1 ] && exit 1 } #### Main logic #### # Make sure log dir exits [ ! -d $LOGBASE ] && $MKDIR -p $LOGBASE # Verify dirs verify_backup_dirs # Okay let us start backup procedure # If it is Monday make a full backup; # For Tue to Fri make a partial backup # Weekend no backups case $NOW in Mon) full_backup;; Tue|Wed|Thu|Fri) partial_backup;; *) ;; esac > $LOGFIILE 2>&1
About third-party backup tools
Linux and Unix-like systems provide many third-party tools that can be used to schedule backups, including tape backups, such:
See
Via: http://www.cyberciti.biz/hardware/unix-linux-basic-tape-management-commands/
Author: Vivek Gite Translator: alim0x Proofreader: Mr eye
This article was originally compiled by LCTT and launched with the honor of Linux in China
This article permanently updates the link address:
Start building with 50+ products and up to 12 months usage for Elastic Compute Service
1 on 1 presale consultation
24/7 Technical Support 6 Free Tickets per Quarter Faster Response
Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.
A comprehensive suite of global cloud computing services to power your business
Payment Methods We Support
