2 How to set up a router to share the same way online

The first method:

From a LAN port on the original router to the LAN port of the new router, IP or something like the original computer settings. Very simple, that is, the router into a switch to use, a lot of waste of a mouth, to be able to multiple machines. A lazy man is a must.

The second method: the LAN port of the first router receives the WAN port of the newly bought router, which requires a series of settings.

Often someone because the router's LAN port is not enough to buy a new router to expand, or for other reasons need to use two routers to the Internet, this time we need to the second router (hereinafter referred to as the level two router) to set the method has the following two cases:

1, the superior router has the DHCP function, and no other DHCP server exists, level Two routing can use dynamic IP access.

2, the superior router does not open the DHCP server or multiple DHCP servers and static bindings, level two routing can be set to static IP mode.

Detailed setup steps: In this paper, the Tenda wireless router is set as an example

1) Basic Line connection

When connected, the WAN port of the level two router is connected to the LAN port of the first level router. As shown in the figure:

2 using static IP settings

Login Router Management interface, click the "Fast Set"----"Ethernet broadband, Network service provider fixed IP address (static IP)." As shown in the figure:

Select the static Internet mode, click "Next", IP address settings and higher routers LAN port IP in the same network segment, gateway for the superior router LAN port Ip,dns address for the superior router LAN port IP or fill in the local DNS server address (local DNS server address can be consulted to operators), When the settings are complete, click Next, as shown in the picture:

The "WAN status" page appears after the save, as shown in the figure:

3 Using dynamic IP settings

Login Router Management Interface Click "Quick Settings" after the following interface appears:

Click Next:

Click Save, and then view the running status----WAN port status.

Dynamic IP configuration completed online.