20 Kinds of PS technology Taobao Novice must learn

Source: Internet
Author: User
Tags mixed

A simple digital photo-post retouching

1 Open the picture, perform the color image/saturation (-40) to reduce the saturation.

2 Create a new layer, change the layer mode to soft light, use the brush tool to draw a few of the parts that need to be polished, here you can use the color board to extract the color easily.

3 Picture color transition is not soft enough, then perform the filter below the Gaussian blur (+85)

Simple to deal with the lack of photo explosion light

1 Open the picture, copy the background layer, change the pattern of the background layer to color filter

2 to adjust the color level of the background layer

30 seconds to plmm artsy shots.

1 Open the picture, copy the background Layer two times

2 Copy background layer one Gaussian blur (radius 4~6), change the pattern of duplicate background layer two to strong light

3 Create a new layer, add a pattern (predefined and defined half gray and half white stripes pattern), set blending mode to multiply the bottom

Image Dislocation effect

1 Open the picture, create a new layer, select the view-ruler, select the Move tool, drag two blue lines from above and below (9 square)

2 Using the rectangular selection tool, fill the square (1,9 dark, 5,7 black, 3 light gray), store in PSD format, and then close the file

3 Perform filter-twist-Replace, select the PSD file just stored

Note (The displacement filter uses the color values of the displacement chart to displace the selection: White (tonal value =0) is the largest negative displacement, is about to process the image corresponding pixels to the left and upward movement; Black (tonal value =255) is the maximum positive displacement, that is, the corresponding pixels in the image to the right and downward movement; Gray (tonal value =128) does not produce displacement)

Photo Shading Effect

1 Open the picture, perform the selection-select all, then edit-copy, build a new channel, edit-paste will copy the image into the newly created channel

2 Perform image-adjust-image, back to RGB channel, edit-Erase, delete original image

3 Perform selection-load selection, invoke new channel, perform edit-fill (color required)

Atomization effect

1 Open picture, create new layer one, set foreground/Background color (black/white), perform filter-render-cloud, add layer mask

2 Repeat filter-render-Cloud, image-adjust-brightness/contrast (80,0, layer one mode to color filter)

Character Illustration effect

1 open picture, copy background layer, perform image-adjust-channel mixer (gray, +30,+60,+10, monochrome), perform filter-style-find edges, remove clutter with color bands

2 set blending mode to overlay, fill opacity to 50%

3 on the background layer, add a level adjustment layer, adjust output levels (0,+155) color

4 Perform image-adjust-optional color, fine-tune color (red, 0,+100,+100,-75, yellow, 0,-40,+100,-40)

Use color overlay to add light color effect to old photos

1 open picture, copy background layer, perform image-adjust-go color, adjust brightness/contrast ( -42,+18)

2 Add "color overlay" layer style, blending mode to "multiply", dot small color block, select the color you want (red), and then merge the visible layer

3 Add Filter-lens flare (brightness +100)

4 Copy background layer, add "color overlay" layer style again, blending mode to "multiply" (yellow)

Add blue skies to Photos

1 Open the picture and copy a "background copy".

2 Create a new layer and fill the blue background.

3 change blending mode to "multiply"

4 Copy a "background copy 2" on a layer on the background copy

5 Place "background copy 2" on the top level and add a mask to it

6 Select the "Gradient tool", drag the mouse from the top down, the sky into the selected blue

Dealing with hazy artsy shots

1. Copy an original layer (CTRL+J).

2. Use a Gaussian blur filter (+4.0) for the copy layer.

3. Make color adjustment (+50,0,-64)

4. Use the edge of the fuzzy eraser wipe to need a clear part.

5. Appropriate use of layer blending mode.

Create the bright hazy (landscape, ecological category)

1 Open the picture, copy the layer.

2 the layer mode of the replica layer should be "filter color".

3 uses Gaussian blur (+8.6 pixels). L

4 Adjust color image/Saturation (ctrl+u) (0,+12,0).

5 Add some sharpening in the reduction of transparency.

The effect of adding a glass to the photo

1 Select area, press Ctrl+j

2 Gaussian blur (+3.1 pixels) on the shear layer.

3 Adjust the color balance ( -39,+29,+16).

4 new layer. Select the thickness area of the glass to make the gradient custom filling (black-and-white gray tones, in the order of dark, high light, dark, high light), and then press Ctrl+t to adjust the thickness of the glass selection.

5 Filter-Twist-glass, choose preferred pattern (twist degree, smoothness to 1, zoom 50%).

Old photos of burning effect--pure PS processing $

1 Open a picture, perform image-adjust-hue/saturation (+1,-58,+1).

2 image-Adjustment-Change (midtones, darken yellow, deepen red, highlight).

3 Copy the background layer, perform the filter-texture-grains (9,56, vertical).

4 Create a new layer, perform a filter-render-cloud.

5 Perform the image again-adjust-brightness/contrast (+27,+100).

6 Using the Magic Wand tool, select the black selection in layer one.

7 Close the preview of layer one, click Copy Background layer, change the foreground color to dark brown.

8 Execution selection-modification-expansion (5 pixels), Selection-feather (5 pixels)

9 Edit-fill (foreground color), select layer One, select Black selection with magic wand

10 Close background layer and layer one preview, select Copy background layer, perform edit-clear.

11 image-Canvas size, height/width increased by one centimeter, positioned (medium).

12 opens the background layer preview, selects the background layer, fills the foreground color (light brown color).

13 Select Copy background layer, perform layer-layer style-drop shadow. (Bottom laminated, opacity 45%, Angle 45, distance 7, extension 2%, size 10).

14 Merge all layers.

Mottled effect Art Photo frame another method

1 Create a new file press the D key to fill the background with white

2 Then, the filter---render---cloud.

3 ctrl+m Adjust the lower curve (black and white contrast strong).

4 finished after the effect then filter-twist-glass (twist degree 7, smoothness 3, texture-canvas, zoom 50%).

6 Create a new layer with black background and a new layer to add a white rectangle.

7 performs a filter-skew-permutation on the layer on which the rectangle is located, selecting the default option. Then find the newly saved PSD file for replacement.

PS Render your photo atmosphere (landscape)

1 image-Adjustment-Levels (RGB +29,1.0,+234). Color L2WVG. V ' t@4i

2 perform hue/saturation commands (full figure -14,+41,-1).

3 continue to perform hue/saturation (red, hue value reduced, saturation increase).

4 continue to perform hue/saturation (yellow, -22,+45,-1).

5 continue to perform hue/saturation (green, +15,0,0).

6 Adjust brightness/contrast (brightness decrease/contrast increase). Color (H{T2P4CCN

Simple and easy to achieve the sketch effect

1 Open the picture, perform the go color, adjust brightness/contrast (brightness decrease/contrast increase).

2 Copy the background layer (CTRL+J), select the background layer, perform the filter-style-find the edge, and then make the uxxxxx sharpening, and then

Change the layer mode to overlay.

3 Create a new layer, fill white, add noise, and then move blur, change the layer mode to multiply the bottom.

4 with rubber tool (change opacity to 15%), wipe the high light part.

Draw the effect of stroke sketch

1 Open a picture, copy the background layer, select Copy Layer 1 perform filters-blur-Gaussian blur (2.0 pixels)

2 Copy the background layer again, select Copy Layer 2, perform a filter-sketch-watercolor Pen (20,60,80), and set the layer blending mode to dimmed.

3 Copy the background layer again, select Copy Layer 3, set foreground color to red, perform filter-Sketch-scratch paper (25,7,10), and opacity to 30%.

4 Copy the background layer again, select Copy Layer 4, set the foreground color to black, foreground/background color to black/white, perform filter-Sketch-photocopy (1,50), perform level adjustment (rgb,157,.0,159), padding value 30%.

Do a special photo in a simple way

1 Open a pair of pictures.

2 in the channel blue channel, and then in the blue channel to perform filters-style-overexposed, point back to the RGB channel.

Hacker Empire Special Effects

1. Create a new file with a white background size of 500x300,rgb mode.

2. Use the text Input tool to enter a 01 code randomly, and press ctrl+t to rotate it vertically over and over, and copy several to pull into unequal size, put a few randomly. There is also a way to use a filter, you can achieve a very good effect. is the menu-filter-texture-particles, the intensity and contrast are adjusted to 100, the particle type selection perpendicular to it.

3. Combine the text and background layers of the 01 code and set the foreground color to r:100, g:255, b:0 green, and background color set to black.

4 Select menu-Filter-neon light effect, light-emitting size set to 10, luminous brightness of 15.

5. Select menu-Filter-style-illuminates the edge, the edge width is set to 1, the brightness is set to 20, and the smoothness is set to about 1.

6. Select Menu-image-Adjust-brightness/contrast, adjust brightness to 10, adjust the contrast to around 60

A case of Ps "reverse negative punch" Portrait processing

"Reverse negative punch" is a special technique in film filming. is to use negative flushing process to flush temoerature, this will get more bizarre and interesting colors. If used in mm portrait photos, it will be filled with a kind of avantgarde and even decadent decadent color.

1 Open the image and let the right side display the channel panel.

2 in the Channel Control Panel selected blue channel, into the "Image" menu, select "Application Image", select "Reverse", Mixed mode with "multiply", opacity is 50%, confirm.

3 in the Channel Control Panel selected green channel, into the "Image" menu, select "Application Image", select "Reverse", Mixed mode with "multiply", opacity is 20%, confirm.

4 in the Channel Control Panel selected red channel, into the "Image" menu, select "Application Image", Mixed mode with "color deepen", confirmed.

5 in the Channel Control Panel to select the blue channel, into the "image"-"Adjustment" menu, select "Color" (or directly using the shortcut key "Ctrl+l") in the "Input level" three column input: 25, 0.75, 150, confirmed.

6 in the Channel Control Panel to select the green channel, into the "image"-"Adjustment" menu, select "Color" (or directly using the shortcut key "Ctrl+l") in the "Input level" three column input: 40, 1.20, 220, confirmed.

7 in the Channel Control Panel to select the red channel, into the "image"-"Adjustment" menu, select "Color" (or directly with the shortcut "Ctrl+l") in the "Input level" three columns input: 50, 1.30, 255, confirmed.

8 in the Channel Control Panel to select all RGB channels, into the "image"-"Adjust" menu, choose "Brightness/contrast" to adjust the contrast brightness-5, contrast +20, confirmed.

9 in the Channel Control Panel to select all RGB channels, into the "image"-"Adjust" menu, choose "Hue/saturation" (or directly with the shortcut "Ctrl+u") adjust saturation +15, confirm

Category:
    • PS Getting Started Tutorial
Related Article

E-Commerce Solutions

Leverage the same tools powering the Alibaba Ecosystem

Learn more >

Apsara Conference 2019

The Rise of Data Intelligence, September 25th - 27th, Hangzhou, China

Learn more >

Alibaba Cloud Free Trial

Learn and experience the power of Alibaba Cloud with a free trial worth $300-1200 USD

Learn more >

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.