1. Re-distributing default Seed metric value
Protocol |
Default Seed Metric |
Rip |
Infinity (Infinity) |
EIGRP |
Infinity (Infinity) |
Ospf |
Except Bgp,which is 1 |
Bgp |
BGP metric is set to IGP metric value |
Redistribution into RIP, redistribution of static, connected when the default Seed metrics is 1.
Redistribute into OSPF, redistribute static routes only, and cannot redistribute default routes.
2. Re-distribution Summary
On the router, the a routing protocol is re-distributed into the B routing protocol, which distributes all the interfaces on the router that run the a routing protocol (except ISIS/ODR), and all the learned a routing protocol routes into the B routing protocol.
650) this.width=650; "src=" Http://s2.51cto.com/wyfs02/M00/77/03/wKioL1ZhCaKATOHxAABKhJ9TWLA060.png "title=" Re3.png "alt=" Wkiol1zhcakatohxaabkhj9twla060.png "/>
R1 Configuration
Interface serial0/0
IP address 12.1.1.1 255.255.255.0
Interface SERIAL0/1
IP address 13.1.1.1 255.255.255.0
Interface SERIAL0/2
IP address 14.1.1.1 255.255.255.0
Router EIGRP 90
Redistribute OSPF metric 1500 100 255 1 1500
Network 14.1.1.0 0.0.0.255
No auto-summary
router OSPF 110
Router-id 1.1.1.1
Log-adjacency-changes
Redistribute RIP subnets
Network 13.1.1.0 0.0.0.255 Area 0
Router RIP
Version 2
Network 12.0.0.0
No auto-summary
R2 Configuration
Interface Loopback0
IP address 2.2.2.2 255.255.255.0
Interface serial0/0
IP address 12.1.1.2 255.255.255.0
Router RIP
Version 2
Network 2.0.0.0
Network 12.0.0.0
No auto-summary
R3 Configuration
Interface Loopback0
IP address 3.3.3.3 255.255.255.0
Interface serial0/0
IP address 13.1.1.3 255.255.255.0
router OSPF 110
Router-id 3.3.3.3
Log-adjacency-changes
Network 3.3.3.0 0.0.0.255 Area 0
Network 13.1.1.0 0.0.0.255 Area 0
R4 Configuration
Interface Loopback0
IP address 4.4.4.4 255.255.255.0
Interface serial0/0
IP address 14.1.1.4 255.255.255.0
Router EIGRP 90
Network 4.4.4.0 0.0.0.255
Network 14.1.1.0 0.0.0.255
No auto-summary
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M01/77/04/wKioL1ZhDrCzuHN6AABUn-tWVEk551.png "style=" float: none; "title=" Re1.png "alt=" Wkiol1zhdrczuhn6aabun-twvek551.png "/>
650) this.width=650; "src=" Http://s3.51cto.com/wyfs02/M02/77/05/wKiom1ZhDkeCP4zjAABHRlH4n4o771.png "style=" float: none; "Title=" Re2. PNG "alt=" Wkiom1zhdkecp4zjaabhrlh4n4o771.png "/>
This article is from the "Open Source Hall" blog, please be sure to keep this source http://kaiyuandiantang.blog.51cto.com/10699754/1719485
33. The default Seed metric and redistribution Summary for redistribution configuration experiment