360 Router Recovery factory how to set up

Now, a lot of people are using 360 routers, and many people have encountered the forgotten password thing. At this point will be restored to the factory settings, then in the end how to restore to the factory settings? Today's small series for everyone to bring detailed graphics and text tutorials

There are 2 ways to restore the 360 router settings: 1, set the interface to restore factory settings; 2, press and hold the reset button to restore the factory settings. The next annual meeting details the specific steps of these 2 methods:

Method One, in the settings interface to restore factory settings

1, please enter in the browser: luyou.360.cn or 192.168.0.1 and press ENTER key--"Enter the admin password" login. (If you enter luyou.360 p1.cn, you can not open the Settings page, please click the Reading Tutorial: luyou.360.cn Settings Page Cannot open the solution)

Enter your password and log on to the 360 router settings page

Warm tips:

(1), 360 router "Management password", the default is the WiFi password. If you cannot log in with the WiFi password, you will not be able to set the WiFi password at the same time as the admin password at the first time, and the admin password is set separately.

(2), if you forget another separate set of "Management password", you can only use the content of the two methods introduced, the 360 router to restore the factory set up!

2, click "Routing Settings"-"Restore factory settings"

On the 360 Router Setup page, open the Restore factory settings option

3, click "Restore Factory Settings"

In the Settings page, the 360 router is restored to the factory setting

Note the problem:

Here is a "Save configuration information" option, open, will save 360 routers in the Internet settings, wireless wifi settings, management password and other information. If you turn off the "Save configuration Information" option, you will clear all configuration information from the 360 router, and you should choose whether to open it according to your actual needs.

Method Two, hold down the reset button, restore factory settings

On the 360 router's machine, there is a reset button: Reset, as shown in the following figure. In the case of plugging in the power, use toothpicks, NIB and other sharp objects, has been holding down the reset button does not release. Then notice the LEDs on the 360 router, and when all LEDs are off and flashing again, the Restore factory settings are successful, and the Reset button is released.

Press the reset button to restore the 360 router to factory settings

Note the problem:

(1), "method one, in the settings interface to restore factory settings", users must know the management password, can successfully login to the 360 router settings interface, can be achieved.

(2), if you forget the management password, unable to login to the 360 router settings interface, you can only use the "method two, hold down the reset button, restore the factory settings" in the content described in the implementation.

(3), the restoration of factory settings, 360 router default settings URL is: luyou.360.cn or 192.168.0.1; no login password; The WiFi password is empty and can be connected directly.

(4), hold down the reset button to restore the factory settings, will empty the 360 router all the configuration information. After you restore the factory settings, you need to reset the 360 router networking, reset the WiFi name and password, and reset the admin password.

Above is the 360 router to restore the factory set up the operation method, if there is no understanding of the place, I suggest to read more than a few articles above. If the final problem is still unresolved, you can leave a message behind the article, 192 router technicians, will promptly answer everyone's questions.