640-605RemoteAccess2.0 Examination Syllabus

★ExamDescriptionTheRemoteAccessexam (RMTAC640-605) exceeds.★ExamTopicsThefollowingtopicsaregeneralguidelin

★Exam Description The Remote Access exam (RMTAC 640-605) is one exam within two different series of exams required to achieve either CCNP or CCDP Routing and Switching certification.★Exam Topics The following topics are general guidelin

★Exam Description
The Remote Access exam (RMTAC 640-605) is one exam within two different series of exams required to achieve either CCNP or CCDP Routing and Switching certification.
★Exam Topics
The following topics are general guidelines for the content likely to be stored on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam.
■. Cisco Remote Access Networks Introduction
* Specify and/or identify the Cisco products that best meet the WAN connection requirements for permanent or dialup access connections
■. Selecting CISCO Products for Remote Connections
* Explain and/or identify the advantages and disadvantages of WAN connection types
* Select the appropriate WAN connection types that address specific site connection considerations.
* Select Cisco equipment that will suit the specific needs of a WAN topology
■. Grouping and Cabling the WAN Components
* Identify the components and connections necessary to allow WAN connections like Frame Relay, and isdn pri from the central site to a branch office.
* Identify the components and connections necessary to allow WAN connections like Frame Relay, and isdn bri from a branch office to the central site
* Identify the components and connections necessary to allow a WAN connections like isdn bri from a telecommuter site to the central site
■. Copying ing Asynchronous Connections to a Central Site with Modems
* Specify the commands and procedures necessary to configure an access server for modem connectivity so telecommuters can access the central site.
* Specify the commands and procedures to configure the central site for dial out connections.
* Specify the commands used to reverse Telnet to the modem and configure the modem for basic asynchronous operations.
* Specify the commands and procedures used to set up the modem autoconfiguration feature.
■. Authentication ing PPP and Controlling Network Access with PAP and CHAP
* Specify the commands and syntax used to configure a PPP connection between the central site and a branch office
* Specify the commands and syntax to configure PAP or CHAP authentication to allow access to a secure site.
* Configure Multilink PPP to increase the data throughput.
* Specify the commands used to verify proper PPP configuration and troubleshoot an incorrect PPP configuration.
* Accessing the Central Site with Windows 95
* Specify the commands and procedures to configure a PC to complete a dialup call to the central site router through the traditional telephone network.
■. Using ISDN and DDR Technologies to Enhance Remote Connectivity
* Identify when to use isdn bri and PRI services and select the service that best suits a set of given requirements.
* Identify the Q.921 and Q.931 signaling and call setup sequences.
* Specify the commands used to configure isdn bri and PRI
* Specify the commands used to configure DDR
■. Optimizing the use of DDR Interfaces
* Specify or select appropriate dialup capabilities to place a call.
* Specify the commands and procedures to configure rotary groups and dialer profiles
* Specify the commands used to verify proper dialer profile or rotary group configuration and troubleshoot an incorrect configuration.
■. Using X.25 for Remote Access
* Specify the commands and procedures to configure an X.25 WAN connection between the central office and branch office
* Specify proper X.121 addresses and the commands used to assign them to router interfaces
* Specify the commands and procedures used to verify proper X.25 configuration and troubleshoot incorrect X.25 configuration
■. Establishing a Dedicated Frame Relay Connection and Control Traffic Flow
* Specify the commands and procedures used to configure a Frame Relay WAN connection between the central office and branch office
* Specify the commands to configure subinterfaces on virtual interfaces to solve split horizon problems.
* Specify the commands used to configure Frame Relay traffic shaping.
* Specify the commands and procedures used to verify proper Frame Relay configuration and troubleshoot an incorrect configuration
■. Enabling a Backup to the Permanent Connection
* Specify the procedure and commands used to configure a backup connection that activates upon primary line failure.
* Specify the procedure and commands used to configure a backup connection to activate when the primary line reaches a specified threshold.
* Specify the procedure and commands used to configure a dialer to function as backup to the primary interface.
■. Managing Network Performance with Queuing and Compression
* Determine why queuing is enabled, identify alternative queuing protocols that Cisco products support, and determine the best queuing method to implement.
* Specify the commands to configure weighted-fair, priority and custom queuing
* Specify the commands and procedures used to verify proper queuing configuration and troubleshoot incorrect configuration
* Specify the commands and procedures used to revoke tively select and implement compression
■. Scaling IP Addresses with Network Address Translation
* Describe how NAT and PAT operate.
* Specify the commands and procedures to configure NAT and PAT to allow reuse of registered IP addresses in a private network.
* Verify proper configuration of NAT and PAT with available Cisco verification commands.
■. Using AAA to Scale Access Control in an Expanding Network
* Specify, recognize or describe the security features of CiscoSecure and the operation of a CiscoSecure server.
* Specify the commands and procedures used to configure a router to access a CiscoSecure server and to use AAA.
* Specify the commands used to configure AAA on a router to control access from remote access clients.
　　

[Editor: admin]