9 Road Test Methods

9 Road Test Methods

1. Pie

Objective: To determine the driving track and the inner wheel deviation of a vehicle passing through a continuous obstacle.
Requirements: One Stop, idle speed, steering wheel rotation must be fast and accurate, and the driving track and Inner Wheel difference position of each wheel should be correctly determined.
Essentials:

(1) When you begin to enter the pie Road, the first part on the left of the front head is aligned with the oblique line on the left of the first and second parts of the pie;

(2) when traveling to the lower-left corner of the windshield to align with the center of circular cake No. 3, turn left to the right and then turn to the right for 2 laps, and return to the right;

(3) When the bottom right corner of the windshield is aligned with the center of circular cake No. 4, the right side is directed to the right side, and the right side is directed to the left side by two turns and the back is positive;

(4) When the left-side sight mirror is aligned with the center of the No. 5 circle cake, it is directed to the center of the left side and then directed to the right side for 2 laps and corrected;

(5) When the bottom right corner of the front windshield is aligned with the center of the circular cake on the 6th, the right side is directed to the right side, and the left side is 2 laps and the back is positive.

● The coaches agreed that the difficulty and focus on the operation of the pie road, and the difficulty of the pie road lies in the operation of the 4 and 5 cakes.
2. Unilateral Bridge
Objective: The driver can accurately use the direction of the driving vehicle and correctly determine the positions of all wheels.
Track the vehicle in a straight line and master the technology of non-parallel vehicle operation.
Requirements: One Stop, idle speed through, accurate use of semi-linkage and brake direction.
Essentials, when the second bridge (The Right bridge) is positioned at the front of the driver on the left side, the second bridge (The Right bridge) is directed to the left side to see the distant contrast car body. When the car body is reached, make a half-circle to the right and return to the center.
3. Right turn
Objective: To quickly use the vehicle direction during sharp turns and determine the gap between the vehicle's internal and external wheels.
Requirements: quick turns can be used quickly to determine the internal and external wheel gaps of vehicles.

Essentials: (take a left turn as an example) when the right side of the vehicle body advances near the outer right corner edge, and the left and right sides of the door triangle window aim at the inside and outside right angle lines, the direction is first directed to the left to the end, when the car is right.

4. curve driving
Objective: To use the driver's direction and master the running of the wheel track.
essentials: when the car enters the first bend (visual inspection), press the left line of the right front to enter the second bend (visual inspection), and press the right line on the left front.
5. lateral parking
Objective: Drivers must master the skills of parking the entire vehicle in the right parking space (warehouse) to adapt to the need for temporary parking during daily driving
.
essentials: move on to pole 3 and Pole 1 at 30 cm on the right side of the vehicle, and stop when you see Pole 1 in the rear window. When reversing, turn the left steering light, and the rear window of the car can't see Pole 1, turn one and a half to the right; then look at the left rearview mirror, and see pole 4 hitting the left and one and a half; looking at the right rearview mirror of the front, I saw pole 4 turning to the left for one lap and a half. Finally, when the right rearview mirror of the front overlaps with pole 1, I turned to the right side of the front and turned back to the right side to stop the car.
move the car to the right to turn the light, observe the situation behind the road, to the left to the end with a half linkage without going out of the road line.
6. uphill parking and start-up
Objective: To properly stabilize a vehicle at a fixed position while driving the vehicle in the uphill section.
accurate use of gear and clutch capabilities, to adapt to the operation needs of the uphill section waiting for release.
essentials: (uphill parking) right steering light, right direction, three or more brakes are slowed down to two light refueling doors, and the center of the front is aligned with the roadside line and the middle of the 30 cm line, the car stops when it reaches the driver's left projection line and the parking lever is 2 meters. (Starting from uphill) mount a block, press the left turn lamp, pay attention to the road situation after the car horn, lift the clutch to semi-linkage, the fuel-filling door to the engine speed of 2000 rpm when the manual brake, hold the clutch slowly and move forward.
7. Increase or decrease the block in meters
Objective: To measure the driver's knowledge about the Gear Block.
requirement: the accelerator, clutch, and Gear Block actions are fast and accurate. When the fifth gear is reached, the four gears are removed immediately. When the third gear is reduced, the two gears are removed while the other gear is running.

8. Speed Limit
Objective: To determine the vehicle body position at a certain speed.
Requirements: The driver should drive the vehicle at a speed of no less than 20 kilometers/hour, the vehicle from the three doors
Cross, do not touch the door hanging rod.
Essentials: (from left to right crossing the limited width door) when the vehicle's cab door is just over the limited width door benchmark, quickly jump to the right to turn the direction, when the left corner of the front is aligned with the next limited width door left pole back to the square direction, and adjust the pass through the limited width door; (from the right to the left to cross the limited width door) when the vehicle cab door just passed the limited width door benchmark, quickly to the left to open the direction, when the right front corner is aligned with the right baseline of the limited width door, it is directed to the left back to the square direction and adjusted to pass through the limited width door.
9. fluctuating Road Driving
Objective: To learn the driving essentials of the ups and downs road and to correctly judge the ups and downs road surface.
Make sure that the brakes, clutches, and fenders are properly matched.
Requirements: the vehicle is running normally within 20 meters before the obstacle, and uses low-speed gear or semi-linkage to ensure the vehicle passes through the obstacle smoothly and safely.

Essentials: close to the ups and downs of the road around 20 meters, and change the gear, with a semi-linkage smooth pass.