A detailed tutorial of a Macbook Pro installation dual system

When the dual system is installed, the two systems are mounted in separate partitions, and the system installed will not overwrite the previous system. And each individual system has its own partition format that does not cause conflict. After installing the dual system, there is a multiple-boot selection menu at boot time, which allows you to choose to enter the operating system. In the current state, only one system is running and cannot be switched randomly. If you want to go to another one, reboot and choose again.

1, "Utility"-"Boot Camp Assistant", open and follow the prompts to create a new Windows partition. The partition size depends on your needs.

2, after the partition, according to the Boot Camp assistant prompts, insert the system installation CD. Reboot after the system recognizes the disc. After reboot, automatically enter the Windows installation interface, and then the general loading system flow similar. Check out the boot camp partition directly formatted, do not delete. Choose NTFS format for better compatibility. Install directly after formatting is completed.

Note: You cannot use the ghost system. Do not delete or format other partitions except for the partitions you will use to install the system.

3, completely installed, do not plug any computer peripherals. Put the Mac OS System Recovery CD into the CD drive and install the boot Camp software read from the disk, which has Windows driver software for the MAC book device, which can be used when the installation is over.

　　removing windows

1, the removal of Windows partition method is also very simple, through the Bootcamp assistant can delete win, as shown in the following figure.

2, if not, is the computer to do Windows partition a number of partitions, the solution is first to the application in the utility disk to find Windows in the partition, the general partition is no name and bootcamp, the two erase into the Mac OS hard disk format.

Then go to the total disk to find the partition partition, find the Noname and bootcamp, point to the minus sign, and then pull the Macintosh HD to the end, point apply apply.

3, restart the Mac, open the Bootcamp assistant, you can continue to use the Bootcamp assistant to remove Windows.

　　#FormatImgID_9 #

　　Note: the installation and removal process is actually very simple, the key is to install and have been out before the idea, the process to keep in mind. Install the system is very slow, not clear thinking is very easy to rush into chaos, there are many unnecessary mistakes.