A detailed tutorial on the deep dust-removing and battery-changing of Macbook Pro

The MacBook is a long time, and the fever is very strong, so let's see how we can clean it up.

1, first, we use a Phillips screwdriver to unscrew the back cover 10 screws

2, then the first thing to do is to unplug the battery power cord otherwise it is possible to burn the motherboard, this is the power cord, we hold, pull up, next to the line with plastic crowbar pry up

3, the interface is up, do not force around, do not pull to the line

4, then unscrew the two screws, remove the battery

5, the main board side of the line, flat with crowbar pry up, flat head of the direction of the line to pull, the fan line horizontal pull

6, remove the fan three screws

7, remove the fan dust, unscrew the screws, the fan can be pulled out, bearing oiling

8, the screen near the line, first lift the hook

9, we look at the screen near the connector, this connector is pulled up to pull up

10, then the motherboard line

11, the flat line to pry up

12, pull out the line

13, in turn, the flat lines are pulled up

14, the last is the insertion of the line, can not be randomly drawn, first with the needle to stir the switch, and then pull out

15, finally we remove all the screws on the motherboard, the motherboard can be removed, and then air blowing and brush dust, on the heat conduction grease

16, after finishing we use the opposite steps to install the computer, finally connected to the power, start the computer

　　Precautions:

1, a variety of lines do not pull, divided into three kinds, carefully look at the picture, control operation.

2, must first remove the battery.